643334
21
Zoom out
Zoom in
Previous page
1/36
Next page
ENGLISH
*2ND TIME SLOT SWITCHON
At this point, the second time slot must be programmed.
The sequence to be followed is the same and is repeated as per the 1ST TIME SLOT SWITCHON.
On this occasion simply enter the time, for example start at 15:00 and Stop at 22:00 and to activate the days Saturday and Sunday by setting
them at "ON".
J
WHEN THE WEEKLY PROGRAMMER IS ACTIVE, A BOX OF THE RELATIVE ICON WILL APPEAR ON THE
CONTROL BOARD.
PROGRAMMING EXAMPLE
Let's suppose that the weekly Programmer function is to be used and 4 time slots are to be used in the following way:
- 1st time slot: from 08:00 to 12:00 every day of the week, with room temperature at 19°C, excluding Saturday and Sunday
- 2nd time slot: from 15:00 to 22:00 only on Saturday and Sunday, with room temperature at 21°C
CONTROLS PROCEDURE:
Press key 6 and SET CLOCK will appear.
Press key 2 until enable chrono appears
Enable the chrono
Enable slot 1 and 2.
Press key 1 to exit
SET
CLOCK
ENABLE
CHRONO
1ST TIME SLOT SWITCHOFF
Use keys 4 - 5 to enter the time 12:00”,
which corresponds to the switch-o time of
the 1st time slot.
To conrm and continue programming,
press button 6. Press button 3 to go back to
the previous parameter.
STOP PRG1
12:00
* Where “ENABLE CHRONO” is not present
in the menu, enabling is done directly in
SET CHRONO.
CONTROLS PROCEDURE:
Press key 2 and SET CHRONO will appear.
SET CHRONO
ENABLING THE 1ST TIME SLOT DAYS
To enable/ disable the days use keys 4 and
5; key 2 and 3 to scroll the various days, the
day of the week will appear, followed by
OFF
select from Monday to Friday on ON,
excluding Saturday and Sunday (OFF)
MONDAY..PRG1
ONOFF
Press key 6 to conrm and continue
programming.
START PRG1 OFF will appear.
START PRG1
OFF
1ST TIME SLOT TEMPERATURE SETTING
Press key 6 to conrm and continue
programming.
Using buttons 4 - 5 select the desired
temperature.
(Low -07 - 40°C Hot)
To conrm and proceed press key 6.
SET PRG1
19°C
1ST TIME SLOT SWITCHON
Use keys 4 - 5 to enter the time 08:00”,
which corresponds to the switch-on time of
the 1st time slot.
To conrm and continue programming,
press button 6. Press button 3 to go back to
the previous parameter.
START PRG1
08:00
2ND TIME SLOT SWITCHON*
At this point, the second time slot must be
programmed.
The sequence to be followed is the same
and is repeated as per the 1ST TIME SLOT
SWITCHON.
START PRG2
OFF
21
21


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Extraflame Pellet LCD at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Extraflame Pellet LCD in the language / languages: English as an attachment in your email.

The manual is 5,91 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Extraflame Pellet LCD

Extraflame Pellet LCD User Manual - German - 36 pages

Extraflame Pellet LCD User Manual - Dutch - 36 pages

Extraflame Pellet LCD User Manual - French - 36 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info