695856
18
Zoom out
Zoom in
Previous page
1/32
Next page
18 ENGLISH
V1 AIR
The menu allows to adjust the speed of the front fan in percentage.
CONTROLS PROCEDURE
Press key 6 and SET CLOCK will appear.
Press key 2 several times until USER is displayed.
Press key 6.
"DISPLAY" will appear.
Press key 2 until "V1 AIR" appears.
Use keys 4 -5 to increase (4) or decrease (5)
Press key 6 to conrm and key 1 to return to the previous menus
up to the initial status.
1
STAND BY
STAND  BY WITH DIGITAL THERMOSTAT STANDARD
STBY FUNCTION SET AT ON
If the Stby function is active (ON), when the stove reaches the set room temperature and exceeds it by 2°C, it will switch o after a default delay
time, displaying stand - by.
When the room temperature is 2°C lower than the setting and once the stove has cooled, it will start to work again at the set power and
displaying work.
STBY FUNCTION SET AT OFF DEFAULT SETTING
CONTROL PROCEDURE
Press key 6, SET CLOCK will appear.
Press key 2 multiple times until the word USER appears
Press key 6.
"DISPLAY" will appear.
Press key 2 until "EASY SETUP".
Use keys 4 -5 to increase (3) or decrease (2) the value. Press key 6
to conrm and key 1 to go back to the previous menus up to the initial
state.
EASY SETUP
The volumetric weight of the pellet is the ratio between the weight and the volume of the pellet. This ratio can change while maintaining
the quality of the pellet. By using the EASY SETUP function, it is possible to change the calibration of the volumetric weight, increasing or
decreasing the pre-set values.
In the stove program, the values available go from “– 3”to “+ 3”; all the stoves are calibrated at the factory to the optimal value 0
If you notice an excessive deposit on the burner pot, enter the EASY SETUP program and lower the value by one unit to “- 1”; then wait for the
following day and if there is no improvement, lower the value again up to a maximum of “- 3”. Instead, should it be necessary to increase the
calibration of the volumetric weight of the pellet, it is advisable to go from the default value “0” to “+ 1, + 2, + 3” as required.
EXCESSIVE DEPOSIT OF PELLETS IN THE BURNING
POT
NORMAL OPERATION LITTLE DEPOSIT OF PELLETS IN THE BURNING POT
-3 -2 -1 0 +1 +2 +3
THIRD
DECREASING
RANGE IF THE
FIRST TWO ARE
NOT ENOUGH
SECOND
DECREASING
RANGE IF THE
FIRST IS NOT
ENOUGH
FIRST
DECREASING
RANGE (TEST FOR
1 DAY )
OPTIMAL DEFAULT
VALUE
FIRST
INCREASING
RANGE
SECOND
INCREASING
RANGE IF THE
FIRST IS NOT
ENOUGH
THIRD
INCREASING
RANGE IF THE
FIRST TWO ARE
NOT ENOUGH
18


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Extraflame Novella Evo at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Extraflame Novella Evo in the language / languages: English as an attachment in your email.

The manual is 5,25 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Extraflame Novella Evo

Extraflame Novella Evo User Manual - German - 32 pages

Extraflame Novella Evo User Manual - Dutch - 32 pages

Extraflame Novella Evo User Manual - French - 32 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info