695854
27
Zoom out
Zoom in
Previous page
1/40
Next page
27ENGLISH
WIFI ENABLING CONTROLS PROCEDURE
Press key 6.
Press key 3 until SETTINGS appears and conrm by pressing key 6.
Keep pressing key 3 until WiFi appears and conrm by pressing key 6.
Press key 6 to access ENABLING.
Use keys 4-5 to select enabling "ON"/ disabling "OFF" and press key 6 to conrm.
Press key 1 several times to exit the menu.
FIRST LOAD
This function allows the auger to be lled, thus facilitating rst stove ignition phases, or in the event the pellet hopper is empty. With the
stove cold and "OFF", make sure the pellets have been introduced inside the hopper and activate the FIRST LOAD function, conrming by
pressing OK.
To interrupt continuous loading, simply press key 1 for 3 seconds.
CONTROLS PROCEDURE
Press key 6.
press key 3 until SETTINGS appears and conrm by pressing key 6.
Keep pressing key 3 until FIRST LOAD appears and conrm by pressing key 6.
Use keys 4-5 for enabling “ON” or disabling “OFF”.
Press key 1 several times to conrm and exit the menu.
ADDITIONAL THERMOSTAT
N.B. : INSTALLATION MUST BE PERFORMED BY AN AUTHORISED TECHNICIAN
It is possible to control the temperature of a room adjacent to the room where the stove is positioned (it is advisable to place the optional
mechanical thermostat at a height o the ground equal to 1.50 m). Stove operation with the external thermostat connected in the TA clamp
may dier depending on whether or not the STANDBY function is enabled.
DELTA T
This function allows you to set the hysteresis to switch the stove on and o DELTA T, used as a room temperature adjustment interval if not
managed by an external thermostat. The exact temperature for ignition is SET THERMOSTAT  DELTA T.The temperature for switch-o is SET
THERMOSTAT + DELTA T.
The possible values for DELTA T go from: 0.5 - 5°C
CONTROLS PROCEDURE
Press 6.
press 3 until SETTINGS appears and conrm by pressing 6
Press 3 until DELTA T appears and conrm by pressing 6.
Use keys 4 -5 to set the desired value.
Press 6 to conrm or 1 to return to the previous menus to the initial state.
WIFI
The display allows internet connection using Wi-Fi technology.
This allows remote management and control of the stove using the dedicated APP for Smartphones,
TotalControl 2.0 (Apple Store / Play Store).
The WiFi network can be congured directly from the display using the following procedure (Home network
conguration).
ATTENTION DOWNLOAD:
"TOTAL CONTROL 2.0" APP
CONTROLS PROCEDURE TO RESET WIFI CONFIGURATION AND ENABLE ACCESS POINT
Press key 6.
Press key 3 until SETTINGS appears and conrm by pressing key 6.
Press key 3 until Wi-Fi appears and conrm by pressing key 6.
Press key 3 until RESET appears and the press key 6.
Use keys 4-5 to select start reset “ON” / “OFF” and press key 6 to conrm.
Press key 1 several times to exit the menu.
27


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Extraflame LUCIA PLUS at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Extraflame LUCIA PLUS in the language / languages: English as an attachment in your email.

The manual is 6,11 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Extraflame LUCIA PLUS

Extraflame LUCIA PLUS User Manual - German - 40 pages

Extraflame LUCIA PLUS User Manual - Dutch - 40 pages

Extraflame LUCIA PLUS User Manual - French - 40 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info