811738
22
Zoom out
Zoom in
Previous page
1/36
Next page
22 ENGLISH
ENABLING/DISABLING THE CHRONO
CONTROLS PROCEDURE
Press key 6.
Press 3 until CHRONO appears and conrm by pressing key 6.
Conrm ENABLING by pressing 6.
Use keys 4 -5 to enable (ON) or disable (OFF)
Press key 6 to conrm and key 1 to scroll back through the menus until the initial page.
J
IF THE WEEKLY CHRONO IS ACTIVE ON THE CONTROL PANEL, A SMALL ICON IS DISPLAYED
CHRONO >ENABLING >PRG1 On/o Enable/disable PRG 1
>
PRG2 On/o Enable/disable PRG 2
>
PRG3 On/o Enable/disable PRG 3
>
PRG4 On/o Enable/disable PRG 4
PRG1 >START PRG1 OFF-00:00 Ignition time PRG1
>
STOP PRG1 OFF-00:00 Switch-o time PRG1
>
MONDAY...SUNDAY On/o Enable/disable days PRG1
>
SET PRG1 LOW-TA - 07- 37 °C - HOT Set thermostat PRG1
>
POWER PRG1 1-5 Set power PRG1
PRG2 >START PRG2 OFF-00:00 Ignition time PRG2
>
STOP PRG2 OFF-00:00 Switch-o time PRG2
>
MONDAY...SUNDAY On/o Enable/disable days PRG2
>
SET PRG2 LOW-TA - 07- 37 °C - HOT Set thermostat PRG2
>
POWER PRG2 1-5 Set power PRG2
PRG3 >START PRG3 OFF-00:00 Ignition time PRG3
>
STOP PRG3 OFF-00:00 Switch-o time PRG3
>
MONDAY...SUNDAY On/o Enable/disable days PRG3
>
SET PRG3 LOW-TA - 07- 37 °C - HOT Set thermostat PRG3
>
POWER PRG3 1-5 Set power PRG3
PRG4 >START PRG4 OFF-00:00 Ignition time PRG4
STOP PRG4 OFF-00:00 Switch-o time PRG4
MONDAY...SUNDAY On/o Enable/disable days PRG4
SET PRG4 LOW-TA - 07- 37 °C - HOT Set thermostat PRG4
POWER PRG4 1-5 Set power PRG4
CHRONO
This function allows stove ignition and switch-o to be automatically programmed.
The factory setting for CHRONO is o.
The chrono allows the programming of 4 time slots per day, which can be used every day of the week.
For each time slot, it is possible to set ignition and switch-o times, specic days of application, desired temperature and set power.
Current day and time settings are essential for the correct operation of the Chrono.
Recommendations
Before using the chrono function, you must set the current day and time, so check that you have followed the points listed in the sub-
chapter “DATETIME. To use the chrono function correctly, it must not only be programmed, but also enabled. The 4 time slots can be
overlapped using the ignition and switch-o time settings. In this way, it is possible to create a combination of time slots with dierent
temperatures and power levels, without changing the status of the stove.
N.B.: in the case of overlapping time slots, the stove will remain on until the last switch-o time.
CONTROLS PROCEDURE
Press key 6.
Press key 3 until EASY SETUP appears and conrm by pressing key 6.
Use keys 4 -5 to set the range.
Press key 6 to conrm and key 1 to scroll back through the menus until the initial page.
N.B.: IF THESE ADJUSTMENTS DO NOT SOLVE THE PROBLEM OF PELLET DEPOSITS IN THE BURN POT, PLEASE CONTACT
YOUR LOCAL SERVICE CENTRE.
22


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Extraflame GIUSY EVO 2.0 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Extraflame GIUSY EVO 2.0 in the language / languages: English as an attachment in your email.

The manual is 7.19 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Extraflame GIUSY EVO 2.0

Extraflame GIUSY EVO 2.0 User Manual - German - 36 pages

Extraflame GIUSY EVO 2.0 User Manual - Dutch - 36 pages

Extraflame GIUSY EVO 2.0 User Manual - French - 36 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info