811730
17
Zoom out
Zoom in
Previous page
1/40
Next page
17ENGLISH
BATTERY TYPE AND REPLACEMENT
To insert/replace the batteries, simply remove the battery
protection cover at the back of the radio control device (gure 1).
Insert the batteries according to the symbols imprinted on the
radio control device and on the battery itself.
3 AAA batteries are required for the radio control device to
function.
SOME RADIO FREQUENCY DEVICES E.G. MOBILE PHONES, ETC. MAY CAUSE INTERFERENCE WITH COMMUNICATION
BETWEEN THE RADIO CONTROL DEVICE AND THE STOVE.
Respect the environment!
Used batteries contain metals that are harmful to the environment, and therefore must be disposed of separately in
special containers.
RADIO CONTROL DEVICE
(gure 1)
RADIO CONTROL DEVICE ROOM PROBE
CALIBRATION
This mode allows calibration of the room temperature detected by
the radio control device (with ventilation active only). For correct
calibration, it is recommended to position the radio control in a
room with constant temperature and wait for at least two hours.
Below nd the calibration procedure:
Access the menu and reach TECH MENU”.
Set the access key "F4". - "ADJ REMOTE PROBE"
Using the keys
OK
or
OK
adjust the desired room
calibration.
Save and exit with the key
OK
.
CONFIGURATION
RADIO CONTROL DEVICE CODING PROCEDURE:
1. Disconnect the power supply to the stove.
2. Press the keys
OK
and
OK
at the same time until the screen to choose RADIO ID appears.
3. Using the buttons
OK
and
OK
select the new RADIO ID (it is possible to select a RADIO ID between 0 and 63).
4. Power the stove. Within 10 seconds (the LED on the emergency module will ash) conrm the selected unit by pressing
OK
on the
radio control device.
5. The LED on the emergency module will remain on for 5 seconds to conrm the new conguration.
6. If the conguration was not successful, " " will appear on the display. In this case, repeat the procedure.
J
THE REMOTE CONTROL IS ALREADY CONFIGURED WITH "RADIO ID". IF THERE IS ANOTHER STOVE, TO AVOID
INTERFERENCES, A NEW CONFIGURATION MUST BE PERFORMED, MODIFYING ONE OF THE TWO STOVES.
17


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Extraflame EVELYNE IDRO 2.0 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Extraflame EVELYNE IDRO 2.0 in the language / languages: English as an attachment in your email.

The manual is 10.18 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Extraflame EVELYNE IDRO 2.0

Extraflame EVELYNE IDRO 2.0 User Manual - German - 40 pages

Extraflame EVELYNE IDRO 2.0 User Manual - Dutch - 40 pages

Extraflame EVELYNE IDRO 2.0 User Manual - French - 40 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info