751933

Extraflame Duchessa Idro Steel Manual

27
Zoom out
Zoom in
Previous page
1/32
Next page
ENGLISH
Displays
Display Reason
off
Generator
o
sTaRT The start-up phase is in progress
pelleT feeDinG Continuous pellet feeding is in progress during the ignition phase
iGniTion The ignition phase is in progress
sTaRT-up The start-up phase is in progress
WoRk The normal work phase is in progress
MoDulaTion The
generator
is working at minimum
BuRn poT cleaninG Automatic burn pot cleaning is in progress
*BuRn poT cleaninG
DepRession Automatic burn pot cleaning is in progress - due to insucient depression.
final cleaninG The nal cleaning is in progress
sTanD-By Generator o waiting for re-ignition due to an external thermostat
sTanD-By
coolinG
A new ignition is attempted when the generator has just been switched o. When the generator switches o, one must wait for
the complete shutdown of the fumes motor, then clean the burn pot. The generator can only be re-ignited when these operations
have been performed.
Hoff Generator o due to water temperature over set.
*T-aMB
Displays room temperature (in the models designed for it).
*T - off
Generator o waiting for re-ignition as all the requests have been satised
sTanD-By
Black ouT
The generator
is cooling after a power cut.
Once cooling is completed it will re-start automatically
anTi-fReeze The anti-freeze function is in progress as the H2O t° is below the factory set threshold
the pump is active until the water reaches the pre-set factory parameter +2°C
anTilock The pump antilock function is in progress (only if the generator has been in an OFF state for at least 96 hours); the pump is
activated for the time pre-set by the manufacturer, in order to prevent it from blocking
auTo BloW The automatic blow is active
*excHanGeR Block Automatic exchanger cleaning is blocked
alaRMs
Display explanaTion soluTion
Indicates the presence of an alarm.
On: indicates the presence of an alarm
Flashing: indicates the deactivation of the depression sensor.
The alarm can be reset by pressing key 1/ for 3 seconds only if the fumes motor
has stopped and if 15 minutes have elapsed from when the alarm was displayed.
aspiRaTion
faulT Fumes motor fault Contact after-sales centre
* on applicable models.
27
… 27 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Extraflame Duchessa Idro Steel at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Extraflame Duchessa Idro Steel in the language / languages: English as an attachment in your email.

The manual is 5.25 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Extraflame Duchessa Idro Steel

Extraflame Duchessa Idro Steel User Manual - German - 32 pages

Extraflame Duchessa Idro Steel User Manual - Dutch - 36 pages

Extraflame Duchessa Idro Steel User Manual - French - 32 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info