751933

Extraflame Duchessa Idro Steel Manual

20
Zoom out
Zoom in
Previous page
1/32
Next page
ENGLISH
LOW
The following menu allows the user to adjust the percentage of pellet feed.
If the stove has functioning problems owing to the quantity of pellets, adjust pellet feeding directly from the control board.
The problems correlated to the amount of fuel can be divided into 2 categories:
NO FUEL:
� the stove is never able to develop a suitable ame, tending to remain very low even at high power.
� at minimum power the stove tends to almost switch-o putting the stove in ““NO PELLETS” alarm conditions.
� when the stove displays the “NO PELLETS” alarm, there may be non-burned pellets inside the burn pot.
EXCESS FUEL:
� the stove develops a very high ame even at low power.
� the panoramic glass is very dirty, obscuring it almost totally.
� the burn pot tends to become encrusted, blocking the holes for air intake due to excessive pellet loading, as it is only burned partially.
The adjustment to be performed is in percentages. Therefore changing this parameter will lead to a proportional variation of all stove
feeding speeds. Feeding is from -30% to +20%.
RESET
Allows the user to reset all values modiable by the user to the default values.
CONTROLS PROCEDURE
� Press key 6.
� Proceed by pressing key 2 until USER MENU is displayed.
� Conrm using key 6.
� Press key 2 until RESET is displayed.
� Press keys 4-5 to select ON and press key 6.
� ''DONE'' will appear on the display to conrm.
CONTROLS PROCEDURE
� Press key 6.
� Proceed by pressing key 2 untilUSER MENU is displayed.
� Conrm using key 6.
� Press key 2 until "PELLET" is displayed.
� Use keys 4 - increase 5 to(4) or decrease (5) the load during the WORK stage.
� Press key 1 several times to conrm and exit the menu.
SET CHRONO
This stage is used to program when the generator automatically turns on and o.
The factory setting for SET CRONO is disabled on the generator.
The chrono allows the user to program 4 time spans within a day to use every day of the week.
The switch-on and switch-o time can be set in every time slot, along with the days of use of the programmed time slot and the
desired water temperature (65 - 80°C).
The setting of the current day and time is essential to ensure the chrono operates correctly.
RECOMMENDATIONS
Before using the chrono function, set the current day and time. Therefore check that the points listed in the “Set clock” sub-chapter have been
followed, so that the chrono function works. Aside from programming it, activate it as well.
The ignition and switch-o times must be within the arc of one day, from 0 to 24 and not over several days:
CORRECT INCORRECT
Switch-on time 07:00
Switch-o time 18:00
Switch-on time 22:00
Switch-o time 05:00
Example:
20
… 20 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Extraflame Duchessa Idro Steel at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Extraflame Duchessa Idro Steel in the language / languages: English as an attachment in your email.

The manual is 5.25 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Extraflame Duchessa Idro Steel

Extraflame Duchessa Idro Steel User Manual - German - 32 pages

Extraflame Duchessa Idro Steel User Manual - Dutch - 36 pages

Extraflame Duchessa Idro Steel User Manual - French - 32 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info