The optional pellet feeding kit allows pellets to be fed into the feed-
box from the front without having to extract the insert (operation
that requires machine switch-o).
Further information on the accessories is available on the website,
in the category "accessories".
AIR CIRCULATION PIPES
Create air recirculation inside the structure that covers the insert for correct operation. This prevents the appliance from over-heating.
To guarantee this, just make one or more openings in the lower and upper parts of the covering.
PEDESTAL ASSEMBLY OPTIONAL:
Position the base in the desired point and use the feet to adjust the desired
height (the bolts are positioned in the four external sides of the pedestal in
the lower part).
Remember the power socket on the rear of the pedestal so that the plug is
accessible once installation is completed.
Fix the pedestal to the oor using strong steel plugs with a diameter of 8
mm.
Fix the sliding base to the frame using bolts.
Connect the ue gas exhaust pipe and the air vent as stated in the previous
paragraph.
Take the insert, tilt it so that the wheels t into the relative rails, make it run
until the ue gas auger is completely inserted into the ue gas conveyor box.
Finally open the re door and use the supplied Allen key to turn the screw at
the bottom left corner clockwise.
To understand whether the insert is correctly attached to the base, connect
the plug to the socket and make sure the display switches on.
Mount the hopper support for the pellet and insert it into the relevant
coupling.
PRIMARY AIR VENT:
THE AIR VENT MUST BE MADE OUTSIDE THE FLUE AS
IT MUST NOT SUCK IN OVERHEATED AIR.
PERFORMING THIS CONNECTION INCORRECTLY CAN
JEOPARDISE PRODUCT OPERATION.
Primary air
intake
pipe
N.B.If our pedestal is used, a slot must be created in the ue that allows the pellet level in the feed-box to be checked, thus preventing spillage during
lling.
Do not loaD a greater amount of pellets than the capacity of the tank anD Do not Drop pellets insiDe
Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.
Product:
Forumrules
To achieve meaningful questions, we apply the following rules:
First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.
Register
Register getting emails for Extraflame COMFORT PLUS CRYSTAL at:
new questions and answers
new manuals
You will receive an email to register for one or both of the options.
Get your user manual by e-mail
Enter your email address to receive the manual of Extraflame COMFORT PLUS CRYSTAL in the language / languages: English as an attachment in your email.
The manual is 6.57 mb in size.
You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.
Others manual(s) of Extraflame COMFORT PLUS CRYSTAL
If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.
The email address you have provided is not correct.
Please check the email address and correct it.
Your question is posted on this page
Would you like to receive an email when new answers and questions are posted? Please enter your email address.
