811714

Extraflame COMFORT P70 AIR H49 Manual

30
Zoom out
Zoom in
Previous page
1/40
Next page
TA
30 ENGLISH
FIRST LOAD
This function allows you to activate the gearmotor for continuous pellet feeding.
Before starting the function, make sure the stove is cold and “OFF”.
To set: OK > SETTINGS > FIRST LOAD
To stop continuous feeding, simply press and hold the key
OK
for 2 seconds.
QUICK ACCESS:
Before starting the function, make sure the stove is cold and “OFF”.
Press keys
OK
+ at the same time for two seconds until the message “FIRST LOAD” is displayed.
To stop continuous feeding, simply press and hold the key
OK
for 2 seconds.
RESET
Allows the user to reset all editable values to the default values.
To set: OK > SETTINGS > RESET.
EASY CONTROL
The function allows for two values to be set:
OFF (disabled - factory default)
ON (enabled)
Activation (EASY CONTROL = ON) is recommended in the event that there is an excessive formation of combustion residues in the ue
during operation at reduced power (see FLUE EXHAUST chapter).
Caution! It is advisable to activate the EASY CONTROL function under the supervision of a qualied technician.
To set: OK > SETTINGS > EASY CONTROL
INSTALLATION MUST BE PERFORMED BY QUALIFIED STAFF AND/OR THE MANUFACTURER'S SERVICE TECHNICIANS
DELTAT
This function allows the hysteresis thresholds to be set for stove ignition (DELTA T ON) and switch-o (DELTA T OFF), used as a room
temperature adjustment interval if not managed by an external thermostat.
The possible values of DELTA-T vary between 0.5 - 5 °C
To set: OK > SETTINGS > DELTAT
ADDITIONAL THERMOSTAT INSTALLATION OPTIONAL
The stove can control the room temperature through an additional thermostat (optional).
After ignition (by pressing key 1 or in chrono mode), the stove will work to reach the set value on the thermostat, displaying WORK (closed
contact) on the screen. The standard room sensor is by-passed automatically.
When the thermostat temperature has been reached (open contact), the stove switches to the minimum power level and displays
MODULATION on the screen.
CONTROLS PROCEDURE
A mechanical or digital thermostat with a “normally open” input is required.
Remove the plug from the socket.
Using the gure to the side as a reference, connect the two thermostat cables (clean contact - no 230 V!).
Connect the power to the stove again.
Set MODE to AUX.
PLEASE NOTE: THE TERMINAL CAN BE FOUND IN THE BAG INSIDE THE STOVE.
… 30 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Extraflame COMFORT P70 AIR H49 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Extraflame COMFORT P70 AIR H49 in the language / languages: English as an attachment in your email.

The manual is 12.24 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Extraflame COMFORT P70 AIR H49

Extraflame COMFORT P70 AIR H49 User Manual - German - 40 pages

Extraflame COMFORT P70 AIR H49 User Manual - Dutch - 40 pages

Extraflame COMFORT P70 AIR H49 User Manual - French - 40 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info