696227
25
Zoom out
Zoom in
Previous page
1/36
Next page
ENGLISH
DISPLAY
The "DISPLAY" menu allows:
Regulation of DISPLAY contrast
Activation/Deactivation of backlight.
Enabling/disabling of acoustic signal.
Set timer for Display backlight switch-o.
Set timer for Display switch-o (sleep
mode).
To set: OK > SETTINGS > DISPLAY.
STANDBY
The STANDBY function is used for immediate stove switch-o as opposed to power modulation.
To set: OK > SETTINGS > STANDBY.
DATETIME
LANGUAGE
SET DEGREES
SEE CHAPTER: FIRST STARTUP SETTINGS.
J
FOR CORRECT FUNCTIONING, SET THE ROOM TEMPERATURE TO LOWTA
> SEE CHAPTER ON INSTALLATION OF SUPPLEMENTARY THERMOSTAT
SETTINGS
STANDBY FUNCTION SET TO ON
When the STANDBY function is enabled (ON), if the room temperature exceeds the SET THERMOSTAT value + DELTA T, the stove switches
o after a preset factory delay, and STANDBY will be displayed on the screen.
When the room temperature is less than SET THERMOSTAT - DELTA T and after a certain cooling time, the stove will switch on again.
STANDBY FUNCTION SET TO OFF FACTORY SETTING
When the STANDBY function is not enabled (OFF), if the stove exceeds the set room temperature, it will switch to the minimum power level,
modulating and displaying ‘modulation on the screen. When the room temperature is lower than SET THERMOSTAT the stove will work at the
set power level, and ‘work will be displayed on the screen.
FUNCTIONING WITH SUPPLEMENTARY THERMOSTAT OPTIONAL
STANDBY FUNCTION SET TO OFF FACTORY SETTING
When the STANDBY function is not enabled (OFF), if the stove exceeds the room temperature set on the supplementary thermostat (closed
contact), it will switch to the minimum power level and MODULATION will be displayed on the screen. When the room temperature is lower
than the set value on the supplementary thermostat (open contact), the stove will start to work again at the set power, and WORK will be
displayed on the screen.
STANDBY FUNCTION SET TO ON
If the STANDBY function is enabled (ON), when the room temperature set on the supplementary thermostat is reached (closed contact), the
stove will switch o after a preset (default) delay period, and STAND  BY will be displayed on the screen.
When the room temperature is less than the set temperature on the supplementary thermostat (open contact), and after a certain cooling
time, the stove will switch on again.
25
25


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Extraflame Angela SP at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Extraflame Angela SP in the language / languages: English as an attachment in your email.

The manual is 4,45 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Extraflame Angela SP

Extraflame Angela SP User Manual - German - 36 pages

Extraflame Angela SP User Manual - Dutch - 36 pages

Extraflame Angela SP User Manual - French - 36 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info