18
Potential problem/
Possible indication
on the display
Probable reason Remedial procedure
The machine is not
working, indication
areas of the display
are not flashing
No voltage in the electrical mains
Check voltage in the socket of the mains by switching on any
electrical appliance
No contact between the power cord
plug and the socket of the mains
To provide contact of the power supply plug and the socket
A push button is not pressed
The machine is to be switched on, the push button is to be
pressed
The program is not
fulfilled / CLOSE
DOOR
The door is not closed The door is to be closed to hear a clear click of the lock
Water is leaking
from the chute for
detergents
The chute for detergents is not tightly
closed
The chute for detergents is to tightly be closed
Powder residues are hardened in the
chute for detergents
Hardened residues of powder are to be removed by washing
the chute under flowing water in accordance with clause
9.2.2
The machine is
continuously filling
and discharging
water / F5
The drain hose is wrongly installed
The drain hose is installed in accordance with clauses 3.4.4
– 3.4.7
The free part of the drain hose is
immersed in water
The free part of the drain hose is to be taken out of water
Water is not filled
to the washing
machine / F5
Water is not available in the water line
Water availability is to be checked in the water line by
opening the cock with cold water
The water supply cock is closed The water supply cock is to be opened
The filling hose is compressed The filling hose is to be freed
The filter is clogged which is located
between the cock and the filling hose,
or the filter in the threaded branch of
the electrical valve is clogged
Filters are to be cleaned in accordance with clause 9.3 by
disconnecting the machine from the electrical mains and the
water line
The protection system has operated in
case of water leakage in the filling hose
- a window of red colour in the filling
hose (see fig. 6)
A new filling hose is to be installed
The machine does
not drain water
Wrong installation of drain hose
The drain hose is to be installed in accordance with clauses
3.4.4 – 3.4.7
The drain hose is compressed The drain hose is to be freed
The pump filter is clogged
The pump filter is to be cleaned in accordance with clauses
9.4.2 – 9.4.4
No wringing out /F4
A detergent was used which is not
intended for automatic washing
machines of the big foaming
“RINSING” program is to be selected and switched on
“0” wringing out speed has been set up
(wringing is disconnected)
Wringing out revolutions are to be selected in accordance
with table 2
Goods are concentrated in one part of
the drum
Goods are to uniformly be placed in the drum
Vibration and noise
of the machine
Not all blocking screws and bushes are
removed for transportation
All blocking screws and bushes are to be removed for
transportation in accordance with clause 3.1.2
The machine is not leveled The machine is to be leveled in accordance with clause 3.2.2
Big goods (bed-sheets, table-clothes,
etc.) are concentrated in one part of
the drum
Goods are to uniformly be placed in the drum
Table 4 possible malfunctions
