12
7.1.2 Small goods (handkerchiefs, socks, etc.), brassieres with beads, as well as delicate goods (thin tights, stoc-
kings) should be put to a special bag before washing.
7.1.3 For getting better results of washing and wringing out it is recommended to wash big and small goods
together.
IT IS PROHIBITED to load only the goods made of fabrics absorbing a big amount of water (terry towels,
dressing gowns, carpets, etc).
7.1.4 Before starting sports footwear washing the following is required:
— shoe strings are to be taken out of the shoes; ;
— sand is to be removed and the external surface of the footwear is to be washed.
7.2.1 A chute is intended in the machine for detergents in accordance with figures 1, 14.
The chute has three sections, marked with figures and a symbol:
1 — for preliminary washing with the use of powder detergents and bleaching substances;
2 — for the main washing;
— for special treating substances (conditioning, smoothening, starching, aromatizing additives).
The following is installed in addition to a chute section:
— a chute for the liquid bleacher marked with letters Cl;
— a curtain for the use of liquid detergents.
7.2.2 Detergents, bleachers and conditioning additives should be used for washing which are intended for
automatic washing machines with the account of recommendations of the detergent manufacturer.
7.2.3 Dozing of detergents should be carried out with the account of the mass of goods, their soiling and water
hardness.
7.2.4 When a powder detergent is used a curtain should be removed from section 2 of the chute (if it is installed).
Check so that the powder should not get to a section for special treating substances
in accordance with figure
15, as in the process of rinsing foam will be formed and white spots may appear on goods.
7.2.5 When additional functions
, are chosen the powder detergents are to be used which are to be
placed to section 1 in accordance with figure 14.
7.2.6 When the liquid detergent is used a curtain must be installed to section 2 in accordance with figure 16,
and figure levels in milliliters are marked on both sides of the curtain. In order to freely move the curtain by guiding
slots to the lower position it should be inserted to the chute section by the front surface with figures;
— 200, 150, 100, 50
7.2.7 Overfilling of special treating substances in section
(above the MAX mark on the cap), as well as pen-
etration to neighboring sections will result in lower quality of washing.
7.2.8 Bleaching substances during selection of the program “SOILS” are to be placed to section 1 in accordance
with figure 14, and bleaching takes place directly after the main washing.
Before the use of the liquid bleacher a chute for the liquid bleacher is to be inserted to section 1 in accordance
with figures 14,15. A mark on the cap CL MAX determines the maximal level of bleacher filling to the chute.
7.2.9 For improvement of washing quality and machine protection from lime sediments during washing in water
having hardness degree II or III a water smoothening agent is to be used along with a detergent. It should be added
to the detergent to section 2 in accordance with figure 14 as per manufacturer’s recommendations.
The water hardness degree is to be determined as per table 1. Information about the water hardness may be
obtained at the local water supply company.
IT IS PROHIBITED to remove the chute for detergents during machine operation in avoidance of water leakage
