642850
46
Zoom out
Zoom in
Previous page
1/64
Next page
46
EN
Figure 18Figure 17 Figure 19
solenoid-operated valve
�lter
7 MACHINE ATTENDANCE
MACHINE CLEANUP
CAUTION! Disconnect the Machine from the electric main and close water delivery cock before
cleanup.
Clean the machine regularly. Outer Machine’s surfaces, parts of plastic and rubber materials should be
wiped with soft wet cloth only.
Wipe the gasket along its contour, in accordance with Fig. 1, by a soft dry cloth after every washing.
CAUTION! Take out the accumulations of foreign particles on the gasket of the door.
IT IS FORBIDDEN to use the chemical agents, abrasive compositions, alcohol, gasoline, and other
solvents to clean the Machine as they may damage it.
The detergents dispenser drawer needs periodic washing. For this purpose, pull the drawer out, and pr-
essing down a little to the snug of the lid, following the indicator, and take it out of the Machine (Fig. 17).
Take the shutter and caps out of the pan in accordance with Fig. 14 and flush carefully its outer and
inner surfaces under a jet of warm water. Flush the pan for detergents in accordance with Fig. 18. Insert the
detachable parts into the drawer’s section and install the drawer into the Machine with no squeezing of
lateral surfaces of the section , close the drawer gently.
If rusty objects have been trapped in the Machine together with laundry, stains of rust may appear that
needs to be taken out by the means of stainless steel objects’ cleanup.
CLEANING THE WATER DELIVERY FILTERS
To clean the filters, proceed as follows:
disconnect the filling hose out of the water delivery cock by turning the nut counterclockwise in
accordance with Figs 8;
– disconnect the filling hose from the solenoid-operated valves threaded branch pipe in accordance
with Fig. 19;
– extract the filter out of solenoid-operated valve’s branch pipe with flat pliers or a forceps in accord-
ance with Fig. 19;
– remove a trash from the filter, sweep by the brush and flush filters under the water jet.
Install in the filling hose and the solenoid-operated valves threaded branch pipe in reverse sequence.
Connect the filling hose and check up the leakproofness of hose connections. Junctions should be dry during
Machine’s running.
CLEANING THE PUMP FILTER
Check the drum for the presence of water prior to cleaning the pump filter. If the Machine does not
drain the water.
Clean the filter monthly and after the every washing of the goods with a long hair.
Drain the water remaining in the filter prior to cleaning. To do this, open the filter cover in accordance
with Fig. 20 with a screwdriver or some other tapering object. Draw the hose up to the stop out from the
Machine and place any container for collection of water in accordance with Fig. 21. Remove the plug from
the hose and drain the water in the container. Turn the filter knob counterclockwise in accordance with
Fig. 21 and remove the filter.
CAUTION! Water residues’ bleeding is possible when turning the filter’s knob.
46


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Exquisit WA 6014 A plus at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Exquisit WA 6014 A plus in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 6,09 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info