Manual Exquisit WA 6012 A plus (page 44 of 64) (English, German, Dutch, French)

642849

Zoom out

Zoom in

1/64

When choosing optional functions , place the SD into compartment 1. When using a liquid

SD, put it in right before washing.

Any overdosage of special treatment agents in the compartment (above the level MAX on the cap),

and their getting into the neighbouring compartments will degrade the washing quality.

When choosing the program (Spot Removal), put the bleachers into compartment 1 (Fig. 14), and

the bleaching will take place immediately after the main washing.

ATTENTION! When using a bleacher, never set the optional function of pre-washing.

To improve the washing quality and protect the Machine from lime sediments, when washing in water

having hardness II or III, it is recommended to use, alongside with SDs, a water softener. It should be added

to the SD into compartment 2 (Fig. 14) according to manufacturer’s guidelines.

The water hardness is deﬁned according to Table 2. You may obtain data on your water hardness from

the local water supply entity.

Prior to start washing, close the drawer ﬁlled with the SD.

NEVER move out the detergent drawer, when the Machine is working, otherwise water may leak and

spray out of the Machine.

REMOVAL OF CERTAIN SPOT TYPES

Certain spots cannot be removed from items at usual machine washing. Therefore, they must be removed

manually before washing in the Machine. First try the process in an unseen place of the item, then start from the

edge of the spot and proceed towards its centre to avoid formation of blotchiness. See below the removal methods

of various spots.

Wax should be scraped oﬀ with a rounded object in order not to damage the cloth, then the item is placed

between two sheets of blot-ting paper and hot-ironed.

Spots from ball pens and felt pens are cleaned by means of soft cloth moistened in ethyl alcohol. Watch for

the spot not to bleed.

Spots of mould are removed at washing with adding of a bleacher into the bleacher tray (Fig. 14), if the cloth

withstands the eﬀect of the bleacher. Otherwise, the dirty spot is moistened with 10-percent solution of hydrogen

peroxide and left for 15 minutes.

Light fabric burns left by an iron are removed in the same way as the mould spots.

Rust is removed by special rustremoving agents. Follow the manufacturer’s guidelines.

To remove the chewing gum, rub the cloth with ice, then rub with a force and treat with a piece of cotton cloth

moistened in acetone.

Paint is removed after complete drying. A contaminated spot is wiped with a solvent as indicated in the paint

packing (for example, water, turpentine, trichloroethylene), soaped and washed.

Lipstick spots on cotton and wool are wiped with a cloth moistened in ether, and on silk – in trichloroethylene.

To remove nail varnish (polish), put some blotting paper over the dirty cloth and moisten the spot with acetone

from the backside. By frequently changing the paper, moisten the cloth with acetone, until the spot disappears.

Spots of vegetable oil or tar (resin) are coated with butter for some time, and then washed oﬀ with turpentine.

Grass spots should be soaped by using diluted bleacher. They are easily removed from wool fabrics by 90-

percent alcohol solution.

Hardness

Degree

Water Characterization Water Hardness in

dH Water Hardness in Milli-Mol per Litre

I Soft 0 - 7 Up to 1,3

II Medium hard 7 - 14 1,3 - 2,5

III Hard 14 - 21 2,5 - 3,8

Table 2

Washing Wash at max. temperature of 40 °С

Delicate washing

Wash at max. temperature of 30 °С

Wash at max. temperature of 95 °С

Hand washing

Wash at max. temperature of 60 °С

Washing is forbidden

Table 3

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Exquisit WA 6012 A plus in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 6,09 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Exquisit WA 6012 A plus Manual

Product: