The product is equipped with a remote control powered by a button battery
(if you do not use the remote control for a long time, please remove the
battery).
Note: The buttons on the remote control and the corresponding buttons on the
control panel work exactly the same way (you will notice the additional
"unlock" button on the remote control).
2. Time setting
Setting method: press and hold the "AUTO" button, then press the “Speed” and “Standby”
buttons to set the appliance. Once the hours have been set, press the “auto” button, the
minutes will blink, set them also with the “Speed” and “Standby” buttons.
Note:
- The clock function of this machine is completely independent, the displayed
time has no influence on the purification.
- The device has a backup battery, it is activated when the purifier is not
connected to the power supply. The battery has a maximum autonomy of
10 days, beyond this time, the time is automatically reset. Please reschedule
the time. (See section "Setting the time")
INSTALL/REPLACE THE FILTERS
A. Press in the middle of the front panel to loosen the top part.