717898

Exquisit GE 9106.1 T Manual

3
Zoom out
Zoom in
Previous page
1/58
Next page
Gas Connection and Security
1. Before your appliance is connected to the gas supply, ensure that the gas category and pressure
specifications shown in the data plate corresponds with your gas supply. If necessary call authorized
service for adjusting to gas category.
2. This appliance shall be installed in accordance with the regulations in force and only used in a well
ventilated space. Read the instructions before installing or using this appliance. In the interest of safety this
appliances must be installed and / or serviced by a competent person as stated in the gas safety regulations
current editions.
3. The appliance must not be installed in a room without a window or other controllable opening. If is
installed in a room without a door which opens directly to the outside, a permanent opening is required.
The air circulation should be 2 m3/h per kW of burners.
4. The gas connection should be performed from the right or left. For this reason, change the hose nozzle,
plug and the seals.
5. Please use flexible hose for gas connection.
6. If you make a connection with a flexible metal hose, locate a seal between the main gas pipes.
7. The inner diameter of the flexible hose, which the butane hose nozzle is connected, should be 6mm for the
house-type gas tubes. The inner diameter of the flexible hose, which the natural hose nozzle is connected,
should be 15mm.The hose should tightly be fitted to the hose nozzle by squeezing with a clamp. The hose
should be replaced before its last expiry date.
8. Caution! Make the oven connection to the gas inlet valve, the hose length must be short and be sure that
there is no leakage. The flexible hose used should not be longer than 125 cm for safety.
9. RE-INSPECT THE GAS CONNECTION.
10. When placing your oven to its location, ensure that it is at the counter level. Bring it to the counter level by
adjusting the feet if necessary.
DO NOT MAKE GAS HOSE and ELECTRICAL CABLE OF YOUR OVEN GO THROUGH THE HEATED
AREAS, ESPECIALLY THROUGH THE REAR SIDE OF THE OVEN. DO NOT MOVE GAS
CONNECTED OVEN. SINCE THE FORCING SHALL LOOSEN THE HOSE, GAS LEAKAGE MAY
OCCUR.
INSTALLATION OF THE OVEN FEET
In order to install the oven feet;
1. Foot attachment lath is installed on the oven from the bottom of the oven as shown in Figure 1. Nuts are
centered on these lathes in order to screw feet (Figure 2). Complete the feet installation process by
screwing the feet to the nuts (Figure 3).
2. You can balance your oven by turning the screwed feet according to the surface type you are using.
3. If your oven has plastic food as in Figure-4 you can adjust your ovens height from these feet as turned
clockwise or anticlockwise.
Figure 1 Figure 2 Figure 3 Figure 4
3 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Exquisit GE 9106.1 T at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Exquisit GE 9106.1 T in the language / languages: English, German, Dutch, French, Italian as an attachment in your email.

The manual is 1,12 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info