716483

Exquisit EM6001 sw Manual

16
Zoom out
Zoom in
Previous page
1/37
Next page
16
Assembly page 16/37
UNPACKING THE APPLIANCE
IMPORTANT: This appliance is heavy, so to avoid any risk of injury or fall, let someone help to
take the appliance out of its cardboard box.
Do not use the lid to lift up the ice maker, as this could damage the appliance.
Do not put your appliance upside down, as this would damage the compressor.
Put the ice maker on a stable level surface which is able to hold its weight.
For sufficient ventilation, please let a free space of 20 cm at the back and at the sides of
the appliance.
This appliance is not intended for a continuous use. Therefore it is necessary to switch it off
for at least 1 hour after 5 hours of use.
INSTALLATION INSTRUCTIONS
As with any other cooling appliance, your ice maker should not be started up immediately
after its installation.
Please wait at least 2 hours before starting up the appliance after its installation.
Use an earthed socket.
USE
After having unpacked the appliance, open the lid and remove the ice basket. Clean the
water tank and ice basket thoroughly.
Pour drinkable water in the water tank. Do not fill above the MAX water level mark.
Put the ice basket in the appliance in such a way that it covers the water tank.
Close the lid.
Plug in the appliance (the ICE indicator lamp starts to blink).
Press the ON/OFF button to start the ice making process (the ICE indicator lamp becomes
green steadily).
Press the ON/OFF button to switch off the appliance (the ICE indicator lamp starts to blink).
If the water tank is getting empty, the “ADD WATER” pilot light will turn on. In that case, the
ice maker will stop the ice-making cycle automatically. Fill water in the water tank. Wait
for 3 minutes before pressing the ON/OFF button to resume the ice making process.
When the “ICE FULL” pilot light switches on, it means that you should empty the ice basket.
In that case, the ice maker will stop the ice-making cycle automatically. Empty the ice
basket with the ice scoop and about 5 seconds later the ice maker will resume the ice
making process automatically.
It takes about 7-15 minutes to make ice cubes depending on the ambient temperature
and the water temperature.
Unplug the appliance after use and empty the tank (cf. CLEANING).
CLEANING
Unplug the appliance.
Remove the ice basket. When you have just used the appliance, do not touch the ice
cubes with your naked hand as they are cold/frozen and you would risk getting your
fingers burned.
Empty the tank. To do so, put a receptacle under the emptying drain situated at the
bottom of the appliance and unscrew the drain plug. When the tank is empty, screw back
the plug.
… 16 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Exquisit EM6001 sw at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Exquisit EM6001 sw in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 0,93 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info