790765
14
Zoom out
Zoom in
Previous page
1/18
Next page
Power level
Default working timer (hour)
1
8
2
8
3
8
4
4
5
4
6
4
7
2
8
2
9
2
If the display flashes “ ” alternately with the heat setting
This means that:
• you have not placed a pan on the correct cooking zone or,
• the pan you’re using is not suitable for induction cooking or,
• the pan is too small or not properly centred on the cooking zone.
No heating takes place unless there is a suitable pan on the cooking zone.
The display will automatically turn off after 1 minutes if no suitable pan is placed on it.
When you have finished cooking
1. Touching the heating zone selection control that you wish to switch off
2. Turn the cooking zone off by scrolling down to”0” . Make sure the display shows”0”,then show”H”.
3. Turn the whole cooktop off by touching the ON/OFF control.
4. Beware of hot surfaces “H” will show which cooking zone is hot to touch. It will disappear when the surface
has cooled down to a safe temperature. It can also be used as an energy saving function if you want to heat
further pans, use the hotplate that is still hot.
Locking the Controls
You can lock the controls to prevent unintended use (for example children accidentally turning the cooking
zones on).
• When the controls are locked, all the controls except the ON/OFF control are disabled.
To lock the controls
Touch the keylock control. The timer indicator will show “ Lo ” To unlock the controls
1. Make sure the Induction hob is turned on.
2. Touch and hold the keylock contro for a while
3. You can now start using your Induction hob.
When the hob is in the lock mode,all the controls are disable except theON/OFF , you can always turn the
induction hob off with the ON/OFF control in an emergency,but you shall unlock the hob first in the next
operation
Over-Temperature Protection
A temperature sensor equipped can monitor the temperature inside the Induction hob. When an excessive
temperature is monitored, the Induction hob will stop operation automatically.
Detection of Small Articles
When an unsuitable size or non-magnetic pan (e.g. aluminium), or some other small item (e.g. knife, fork, key)
has been left on the hob, the hob automatically go on to standby in 1 minute. The fan will keep cooking down
the induction hob for a further 2 minute.
Auto Shutdown Protection
Auto shut down is a safety protection function for your induction hob. It shut down automatically if ever you
forget to turn off your cooking. The default working times for various power levels are shown in the below table:
!
!
!
When the pot is removed, the induction hob can stop heating immediately and the hob
automatically switch off after 1 minutes.
People with a heart pace maker should consult with their doctor before using this unit.
Using the Timer
You can set it to turn one cooking zone off after the set time is up.
You can set the timer up to 99 minutes.
Setting the timer to turn one cooking zone off
Cooking zones set for this feature will:
1. Touching the heating zone selection control that you want to set the timer for.
2. Touch timer control , The minder indicator will start flashing and “30” will show in the timer display.
3. Set the time by touching the or control of the timer
Hint: Touch the “-“ or “+” control of the timer once will decrease or increase by 1 minute.
Touch and hold the ”-“ or “+” control of the timer will decrease or increase by 10 minutes.
4. Touching the “-” , to reduce the time outstanding to zero, or press the “timer control”, when the “00”
shows in the minute display, the timer is cancelled.
5. When the time is set, it will begin to count down immediately. The display will show the remaining time and the
timer indicator flash for 5 seconds.
NOTE: The red dot next to power level indicator will illuminate indicating that zone is selected.
6. When cooking timer expires, the corresponding cooking zone will be switch off automatically.
6
H
0
or
6
30
--
36
6.
00
Other cooking zone will keep operating if they are turned on previously.
4
14


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Exquisit EKI600-2 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Exquisit EKI600-2 in the language / languages: English, Dutch as an attachment in your email.

The manual is 5.54 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info