717720
10
Zoom out
Zoom in
Previous page
1/36
Next page
9
TEMPERATURE REGULATION
The temperature in the refrigerator compartment is controlled using the thermostat knob 2 (see
fig. 1) by turning it to one side or the other. The temperature indication in digits is shown beside
the thermostat knob. When the door is closed, the temperature setting can be seen on the
thermostat indicator display 3 (fig. 1). The temperature is regulated on the scale of five digits.
0 = Compressor is switched off. WARN ING! Electric current is not switched off.
1 = highest temperature (lowest cooling)
5 = lowest temperature (highest cooling)
If foodstuffs in the refrigerator compartment are too cold, set the thermostat knob to 1, 2 or 3. If
foodstuffs in the refrigerator compartment are not being chilled sufficiently, set the thermostat
knob to 4 or 5.
Please set the desired temperature in the appliance according to your own requirements!
THE TEMPERATURE IN THE REFRIGERATOR COMPARTMENT MAY VARY DEPENDING ON
AMBIENT TEMPERATURE, THE AMOUNT OF FOODSTUFFS, THE TEMPERATURE OF THE
FOODSTUFFS, AND HOW OFTEN THE APPLIANCE DOORS ARE OPENED AND CLOSED.
IF THE ROOM IS COOL, THE APPLIANCE COOLS LESS. THE TEMPERATURE IN THE APPLIANCE
MAY THEREFORE RISE. Use the thermostat wheel to set a lower temperature.
CHANGING THE OPENING DIRECTION OF THE DOORS
It is recommended that changing the opening direction of the doors should be done with a helper.
You will need two spanners No. 8 and No. 10 and a Philips head screwdriver.
When changing the opening direction of the doors YOU CAN NOT lay the refrigerator horizontally!
NOTE. Direction of door is not changeable in refrigerators with lockable doors.
Do the actions below in the order they are listed:
For models CD290-1004, CD350-1003, CD350-1313, FKU 290 G
,
CD351, KSCD 350.1
CD350-311, CD350-1D, CD350 (see fig. 3):
WARNING! Turn off the appliance and pull the plug out of the electricity supply socket.
1. Unscrew two screws 7 and remove the bottom bracket 8 together with the set of washers 6
on the axle and the spacer 5.
2. Unscrew two screws 7 and remove the bracket 11. Remove the door 4.
3. Unscrew the axle 2 together with the nut 1 and washers 3 from the upper bracket and screw
all this set on the reverse side of the door;
4. Before hanging the door, turn the door over by 180
0
and insert the upper axle in the door.
5. Unscrew fixing screws 12 from doors, remove handles 13 and fix them screwing in free holes
on the same side. Plate 10 remains in its place.
6. Before screwing the bottom bracket 8 together with the set of washers and spacers on the
reverse side of a cabinet, insert the bracket axle to the door.
7. Screw the bracket 11 on the reverse side of a cabinet.
For models CD350-1004, CD350-2D, KS CD 350.2, CD350-2 (see fig. 5):
WARNING! Turn off the appliance and pull the plug out of the electricity supply socket.
1. Unscrew two screws 12 and remove the bottom bracket 13 together with the set of washers
11 on the axle and the spacer 10.
2. Unscrew two screws 12 and remove the bracket 15. Remove the bottom door 9.
3. Unscrew fixing screws 7 of the middle bracket. Remove the middle bracket 6 together with
washers on the axle and the spacer 5. Remove the top door 4.
4. Unscrew the axle 2 together with the nut 1 and washers 3 from the upper bracket and screw
all this set on the reverse side of the door.
5. Take out the plugs 18 in the crossbar zone and displace them on the reverse side.
6. Before hanging the upper door, turn the door over by 180
0
and insert the upper axle in the
door.
10


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Exquisit CD350-1D at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Exquisit CD350-1D in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 1,06 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info