783560
17
Zoom out
Zoom in
Previous page
1/50
Next page
Machine instalation
16 English
14. Machine instalation
When installing the machine on its cabinet, it should be as horizontal as possible (use its adjustable foots to
achieve it), so the coffee will come out evenly to the cups, through all the spouts of each group.
14.1. Electrical installation
Wiring of coffee machine must be done by qualified staff, always following the safety instructions:
Before plug in the machine, make sure the voltage of the supply mains corresponds to the ratings
indicated on the nameplate featuring the appliance’s technical data.
The wall socket must be equipped with an earth contact. Make sure the earth system is efficient and
in conformity with current safety rules. It is compulsory to earth the machine.
You should protect the electric line of the installation with a magnetothermic switch appropriated for
the power consumption of the machine, specified on its nameplate.
A residual current circuit breaker must be installed in accordance with the characteristics of the
installation.
Check the characteristics & rating of the system and that the diameter of the cables are suitable for
the power absorbed by the machine.
Do not use any extension cable or plug adapter, nor multiple wall sockets.
The manufacturer is not liable for the injuries or damages on people and/or animals, as well as
damages on equipment, caused by a improper installation of the coffee machine.
14.2. Connection options
Consult the nameplate on your machine as to know which is the electrical characteristics of the machine type
that you have. Depending on it, you can connect your machine as follow:
NEUTRAL
PHASE
Supply hose
Machine: Supply
Blue
Brown
Yellow /Green
230 Vac
NEUTRAL
PHASE
Supply hose
Machine: Supply
Black
White
Green
125 Vac
230Vac Ph+N
PHASE
PHASE
Supply hose
Machine: Supply
Blue
Brown
Yellow /Green
230 Vac
2Ph 230Vac 125Vac Ph+N
14.3. Hydraulic installation
14.3.1. Machine ready for water network connection
Using the flexible hose provided with the machine, connect it to a connection hose 3/8” male with a closing
valve. Placement of a water softener filter between the valve and the machine is compulsory.
14.3.2. Machine with water reservoir
Remove the upper lid from the coffee machine.
Fill up the water reservoir with decalcified water. Avoid spilling water over the machine. Electrical
shock could occur.
READ CAREFULLY THIS INSTRUCTION MANUAL PRIOR TO INSTALL OR
OPERATE THE ESPRESSO MACHINE
Heruntergeladen von manualslib.de Handbücher-Suchmachiene
17


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Expobar Office Molino Control at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Expobar Office Molino Control in the language / languages: English, German, French, Spanish as an attachment in your email.

The manual is 2.27 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info