499724
23
Zoom out
Zoom in
Previous page
1/49
Next page
Aditional capabilities in machines with display
21 English
Clock adjust
Doses Programming
Select 30s
XX ºC hh:mm
Select
OFF
21. Aditional capabilities in machines with display
When having an electronic display, besides the aforementioned functions, there are many extra functions
available:
Automatic daily switch ON/OFF; “Stand by” function.
Time management: Current day and time.
Advertising display.
Digital control and visualization of the temperature of the boiler through the display.
Maximum control of temperature in the boiler through PID technology.
On-display help for re-programming and adjusting.
Visual alarm to warn about the need of regeneration of the water softener filter.
21.1. Espresso machine status
The espresso machine has 3 possible status (this is only valid for display
machines):
ON status:
The machine is active and ready for brewing
espresso. Generally when switching on the main switch, the
machine will enter this status.
stand by Status.
The main switch is ON, but the espresso machine is off,
and this is shown in the display. – To arrive to this status, being the
machine with the main switch ON, and the machine in ON status, press the
continuous key, and without releasing it, press the 2 short coffees key. The
machine will show “OFF” on the display. To get out from this status, press
the 2 short espressos, the machine will come back to the ON status.
OFF status. The espresso machine is totally disconnected.
21.2. Access to aditional menus
Keep pressed over 8 seconds the continuous espresso key on the left keypad.
(Entering programming). Now all the keypad lights will light up
continuously, but the one of continuous erogation that will flash
intermittently. At this point of the menu, we can adjust the
volumes of the different dosis of each selection, as explained in
previous point 8.1Programación de las dosis en la centralita
electrónica”. In the display will appear the message shown.
Now, press again the continuous button, untill the display shows
“Clock adjust” on the display: From this point we get acces to the
different settings. – Enter this menu by pressing the button “two
short coffees” (OK).
21.3. Clock adjust: adjusting hour, minutes and day
Once pressed the button “two short coffees” (OK) while “Clock adjust” was displayed, the adjusting of the clock
begins.
OFF
ON
- On
- Auto cleanin
g
Stand by
On
+ -
OK
PROGRAMING MENU
(press over 8 secs)
CONTINUOUS
(press between 1 & 8 secs.)
TEA (on customer request)
(press under 1 sec.)
23


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Expobar Markus at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Expobar Markus in the language / languages: English, German, French, Spanish as an attachment in your email.

The manual is 0,65 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info