KEY TO THE MAIN COMPONENTS OF THE
APPLIANCE
Control panel1.
Arm release handle2.
Motor section3.
Dough hook4.
Dough whisk5.
Balloon whisk6.
Splash guard7.
Mixing bowl8.
Lid9.
Motor spindle (not visible on picture)10.
Accessories socket11.
Arm12.
Control panel
Speed 1 buttona.
Speed 2 buttonb.
Speed 3 buttonc.
Speed 4 buttond.
Speed 5 buttone.
Speed 6 buttonf.
OFF button g.
(switch off/pause)
PRIOR TO FIRST USE
Remove all packaging and transport materials from •
the inside and outside of the appliance.
Check that the appliance has no visible damage •
and that no parts are missing.
Then clean the accessories before use.•
Clean all parts that come into contact with food •
before using the appliance for the rst time (or
after prolonged storage). See “Cleaning”.
USING YOUR KITCHEN APPLIANCE
Assembly
Place the motor section on a at surface, e.g. a 1.
kitchen counter, and make sure it is standing rmly.
Check that the protective cover is tted in the 2.
accessory socket
Tilt down the arm release handle. The arm tilts 3.
upwards.
Fit the lid onto the underside of the arm and turn it 4.
slightly to the left, so that it locks into position.
Fit the mixing bowl in the recess on the motor 5.
section base. Turn the mixing bowl
slightly clockwise, so it locks into
position.
First mount the splash guard on the 6.
dough hook or the dough whisk (see
the pictures). Turn the accessory
clockwise until the metal pins lock
into position.
Then t the desired accessory onto 7.
the accessory shaft on the underside
of the arm.
The dough hook is used for o
heavy dough, minced meat or
other demanding kneading jobs.
The dough whisk is used to mix o
lighter types of dough.
The balloon whisk is used for whisking cream, o
egg whites, etc.
Turn the accessory, so the pins on the shaft are
aligned with the depressions on the accessory’s
top edge. Press the accessory up towards the arm,
turning it at the same time to the right so that the
pins slide into position, thus securely locking the
accessory in place. The accessory must not be
loose nor should you be
able to pull it free.
Lower the arm so that 8.
it locks into place with
a click. The lid must t
tightly onto the mixing
bowl. If not, it is tted
incorrectly.
The appliance is now 9.
ready for use.
Whisking, kneading and mixing
Connect the appliance. The indicator next to the 1.
OFF button (g) lights up.
Start the appliance by pressing one of the 6 speed 2.
buttons (a-f). Speed 1 (a) is the slowest and speed
6 (f) is the fastest. Recommended speeds, time
and capacity are shown in the table below.
Stop the appliance by pressing the OFF button 3.
if you want to pause, for example to add more
ingredients.
If you need to scrape inside the mixing bowl, wait 4.
until the accessory has stopped completely. Use
the spatula, never your ngers.
Switch off the appliance by pressing the OFF 5.
button when you have nished mixing. Always
unplug the appliance before you change the
accessories or take the appliance apart.
