USING THE APPLIANCE
Heatingofmilk
1. Remove the lid (1).
2. Installthestirrer(9)inthebaseof
thejug(4).
3. Pourthedesiredquantityofmilk
into the appliance.
o Donotlltheapplianceabove
thetopmark(3)ontheinside
oftheedge(240ml).Always
ensure that the amount of milk
exceeds the bottom mark.
4. Checkthatthesiliconeseal(2)is
correctlyttedtothelidandseals
properly.
5. Closethelidandensurethatit
clicks into place.
6. Place the appliance on the base (7)
and connect the appliance.
7. Pressthe“start/pause”(6)button
toswitchontheappliance.Thetwo
indicator lamps (5) are lit and the
appliance will start heating the milk.
8. Theappliancewillturnoff
automatically a few seconds after
the milk has reached the optimum
temperature(approximately70
o
C).
Ittakesaround2minutes.
9. Leave the appliance to cool for two
minutes before using it again.
10. Removetheplugfromthesocket
and allow the appliance to cool
after use.
11. Cleanallpartsbeforestoringthe
appliance.See“Cleaning”.
Heating and frothing of milk
1. Remove the lid.
2. Fitthewhisk(8)intothebaseofthe
jug.
3. Pourthedesiredquantityofmilk
into the appliance.
o Donotlltheapplianceabove
the middle mark on the inside
ofthejug(115ml).Always
ensure that the amount of milk
exceeds the bottom mark.
4. Checkthatthesiliconesealis
correctlyttedtothelidandseals
properly.
5. Closethelidandensurethatit
clicks into place.
6. Place the appliance on the base
and connect the appliance.
7. Pressthe“Start/pause”button
toswitchontheappliance.The
two indicator lamps are lit and the
appliance will start heating the milk.
8. Theappliancewillturnoff
automatically a few seconds after
the milk has reached the optimum
temperature(approximately70°C).
Ittakesaround2minutes.
9. Leave the appliance to cool for two
minutes before using it again.
10. Removetheplugfromthesocket
and allow the appliance to cool
after use.
11. Cleanallpartsbeforestoringthe
appliance.See“Cleaning”.
Frothing of milk
1. Remove the lid.
2. Fitthewhiskintothebaseofthe
jug.
3. Pourthedesiredquantityofmilk
into the appliance.