Manual Exido 245-089 (page 14 of 22) (English, German, Danish, Polish, Swedish, Norwegian, Finnish)

508248

Zoom out

Zoom in

1/22

PRIOR TO FIRST USE

• Unrollthecordfullybeforeuse.

• Torinseouttheinside,llthereservoir(1)with

water, switch on and allow the water to run through

the appliance, before using it to make coffee.

USING THE APPARATUS

1. Flip open the cover for the water reservoir and the

lter(2)andcarefullypourtherequiredamountof

water into the water reservoir. Close the lid again.

o Fill the water reservoir using the glass pot. Do

notpourmorethantheequivalentof12cupsof

coffee (marked 12 on the water level indicator on

theglasspot(10)).

2. Placealter(size1x4)inthelterfunnel(3),and

put coffee into it. Alternatively, use the permanent

lter(4)insteadofdisposablelters.Closethelid

again.

3. Ensure that the lid (6) for the glass pot is down and

then place the pot (8) on the hotplate (9) beneath the

lterfunnel.

4. Switch on the appliance by switching the on/off

button (11) to ”I”. The control light in the switch is lit

and the appliance starts working.

o You can remove the glass pot during brewing to

pouracup.Theautomaticanti-dripdevice(5)

ensuresthatcoffeedoesnotdripfromthelter

onto the hotplate. As soon as you replace the

glass pot brewing will resume. Make sure you

putthepotbackwithin30secondsorless,as

otherwisethelterfunnelcouldoverow.

o Always make sure the lid on the glass pot is

closed,otherwisetheanti-dripdevicedoesnot

work correctly.

5. Once the coffee is ready, the hotplate under the

glass pot will keep it hot.

6. Switchoffbypushingtheon/offbuttontothe”0”

position.

o Theapparatusisttedwithanoverheating

cut-outwhichautomaticallyswitchesitoffifyou

forget.

CLEANING

When cleaning the appliance, you should pay attention

to the following points:

• Removeplugfromthemainssocket,andallowthe

appliance to cool down before cleaning it.

• Donotimmersetheapplianceinwaterandmake

sure no water enters the appliance.

• Cleantheappliancebywipingitwithadampcloth.

A little detergent can be added if the appliance is

heavily soiled.

• Neveruseascouringpadoranyformofstrong

solvents or abrasive cleaning agents to clean

the appliance, as those may damage the outside

surfaces of the appliance.

• Thelterfunnel,thepermanentlterandtheglass

pot can be washed by hand or in a dishwasher.

• IMPORTANT!Allowtodryfullyaftercleaningbefore

using again. Do not use the appliance if damp.

DESCALING

The lime content of ordinary tap water means limescale

may gradually be deposited inside. This limescale may

be loosened using acetic acid (NOT ordinary vinegar) or

descaler, available in supermarkets, etc.

1. Mix100mlaceticacidwith300mlcoldwater,or

follow the instructions on the descaler packaging.

2. Pour the solution into the reservoir and switch on

the apparatus using the on/off button.

3. Allow half of the solution to run through, and then

switch off using the on/off button.

4. Switchoffforaround10minutes,andthenswitch

on again, and allow the rest of the solution to run

through.

5. Toremovethenalresiduesoflimescaleandacetic

acid, pour a potful of cold water into the water

reservoir, switch on and allow the water to pass

through.

6. Run fresh water through the appliance 3 times (as

described in point 5). The apparatus now ready for

use.

FOR UNITED KINGDOM ONLY

Plug wiring:

ThisproductisttedwithaBS136313-ampplug.If

you have to replace the fuse, only those that are ASTA

or BSI approved to BS1362 and with a rated current of

13ampsshouldbeused.Ifthereisafusecovertted,

thiscovermustberettedafterchangingthefuse.If

the fuse cover is lost or damaged, the plug must not be

used. You must also check if the socket outlets in your

hometwiththeplugoftheappliance.Ifthesocket

outletinyourhomedoesnottwiththeplug,theplug

must be removed and disposed of safely as insertion

of the plug into the socket is likely to cause electric

hazard.Areplacementplugshouldbewiredaccording

to following description.

Important

This appliance must be earthed. The wires in the cord

set are coloured thus:

BLUE- Neutral, Brown-Live, Green& Yellow-earth

(For detachable plug only)

As the colours of the wires in the mains lead of this

appliance may not correspond with the coloured

markings identifying the terminals in your

plug, proceed as follows:

ThewirethatiscolouredGreen&Yellowmustbe

connected to the terminal in the plug that is marked

with the letter E or by the earth symbol, or coloured

green&yellow.

The wire that is coloured blue must be connected to

the terminal that is marked with the letter N or coloured

black.

The wire that is couloured brown must be connected to

the terminal that is marked with the letter L or coloured

red.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Exido 245-089 in the language / languages: English, German, Danish, Polish, Swedish, Norwegian, Finnish as an attachment in your email.

The manual is 0,44 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Exido 245-089 Manual

Product: