800713
5
Zoom out
Zoom in
Previous page
1/48
Next page
5
automatically, since a re risk exists if the heater
is covered or positioned incorrectly.
- Do not place the appliance close to curtains and
other combustible materials.
ASSEMBLY
Part Description
1. Heating element assembly
2. Knob
3. Body
4. Position indication plate
5. Pull switch
6. Tube cover
7. Upper post assembly
8. 3x M5X6mm screw
9. Middle post
10. 3x M5X6mm screw
11. Lower post assembly
12. 2x clamp
13. Power cord
14. B as e
15. 4x M6X30mm screw
16. Base assembly
Before installing your appliance, make sure
that the supply plug is not connected to the
main supply plug. Take out all the screws before
assembly.
01 Insert the lower post assembly (11) into the
base assembly (16) and then fix it tightly by
means of 4x M6X30 screws (15). Insert the base
cover (14) and then insert one of the clamps (12)
onto the lower post (11). (fig.1)
02 Join the lower post assembly (11) and the
middle post (9) together with 3x M5X6 screws
(10). Insert one clamp (12) onto the middle post
(9). (fig.2)
03 Join the upper post assembly (7) and the
middle post (9) together with 3x M5X6 screws (8).
(fig.3)
04 Loosen the tube cover (6) and take out the
inner tube from the upper post assembly (7)
and tighten the tube cover (6). Join the heating
element assembly (1) and the upper post
assembly (7) together, then fix them tightly by
rotating the knob (2), and put the power cord
supply (13) into the clamps (12). (fig.4)
05 According to the requested angle the heating
element (1) can be adjusted at an angle of 0°-45°.
(fig.5) The minimum installation height of the
heater is 1.8 meters.
OPERATION
The appliance is switched on by means of the pull
switch (5). The slight vibration noticeable when
the appliance is switched on will stop after a few
seconds.
SWITCH POSITIONS
- Position 0: Stop
- Position 1: 650W (normal power)
- Position 2: 1350W (intermediate power)
- Position 3: 2000W (full power)
MAINTENANCE
Your appliance does not require any particular
maintenance. However, in the event of a
malfunction, please consult a service agent or
similar qualified person.
THE ENVIRONMENT
When this product reaches the end of its useful life,
hand it in at a collection point for the recycling of
electric and electronic equipment. Please refer to
the symbols on the product, the users instructions
or the packaging. Contact your municipality for
the address of the appropriate collection point in
your neighbourhood.
5


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Excellent Electrics YT2-000060 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Excellent Electrics YT2-000060 in the language / languages: All languages as an attachment in your email.

The manual is 0.98 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info