800653

Excellent Electrics DX5-000030 Manual

2
Zoom out
Zoom in
Previous page
1/20
Next page
2 | Instructions for use – Fan
UK FAN
WARNING: NEVER PLUG IN THE FAN
WHEN IT IS TAKEN APART, THIS MAY
CAUSE ELECTRICAL HAZARDS. READ
AND SAVE THESE SAFETY INSTRUCTIONS
BEFORE USING THIS FAN.
SAFETY INSTRUCTIONS:
– Use the fan only as described in this
manual.
– This product is intended for household use
only.
– Not for commercial, industrial, or outdoor use.
– Do not immerse unit, plug or cord in water
or any other liquids.
– Do not spray the fan with liquids.
– Do not cover the fan.
– Do not use in humid spaces or near a sink.
– Do not use in the presence of explosive
and/or ammable fumes.
– Do not place the article or any part of it
near open re or another heat source.
– Always place out of reach of children.
– Always place on a stable surface.
– Remove all objects in the direct vicinity
of the article in order not to block the
swerving mechanism.
– Never put anything through the ventilation
cage and always keep under supervision
when switched on.
– Do not place near an open window.
– This appliance is not intended for use by
persons (including children under 8 years)
with reduced physical, sensory or mental
capabilities, or lack of experience and
knowledge, unless they have been given
supervision or instruction concerning use
of the appliances by a person responsible
for their safety. Children shall not play
with the appliance. Cleaning and user
maintenance shall not be made by children
without supervision.
Always unplug from the socket when:
– not in use
– moving the article from one location to
another
– maintaining or servicing parts
– cleaning the article
Do not use when:
– plug or cord are damaged.
– the fan has fallen.
– the fan is not functioning properly.
– the fan is damaged in any way.
– Do not hang or mount the fan on a wall or
ceiling.
– Do not operate the fan if the grills are not
properly placed.
– When the cord is damaged it must be
replaced by a certied electrician.
ASSEMBLING OF THE STAND:
1. Place the 2 bases crossways on top of each other 8
.
Place the pointer in top 9 and screw rmly with the
supplied screws (4 pcs). Use a PH1 cross-head
screwdriver (not included).
2. Remove the adjusting screw, pull the extension tube
upwards and make sure it does not slip away. Push the
protection cover 10 over the pointer downwards, make
sure it falls over the two bases, and screw the adjusting
screw again.
3. Place the ventilator on top of the extension tube and
adjust it with the clamping nut 11 .
ASSEMBLY INSTRUCTIONS
1. Place the back side of the ventilation grille on the
motor spindle 1. Make sure the security bolt and nut
are at the bottom 2. Fasten it with the xing nut 3.
2. Place the propeller as close as possible to the motor
spindle and fasten it with the xing nut 4.
3. Place the front of the grille on the rear. Check if both grilles
are properly placed before closing with 2 clamps
5
.
4. Secure the grill by fastening the security bolt and nut
6.
1 3 4
2
567
8
9
10
11
2 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Excellent Electrics DX5-000030 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Excellent Electrics DX5-000030 in the language / languages: All languages as an attachment in your email.

The manual is 1.45 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info