800648

Excellent Electrics DE2-000100 Manual

3
Zoom out
Zoom in
Previous page
1/44
Next page
Fan – Instructions for use | 3
– Always place on a stable surface.
– Remove all objects in the direct vicinity of
the article in order not to block the swerving
mechanism.
– Never put anything through the ventilation
cage and always keep under supervision
when switched on.
– Do not place near an open window.
– This appliance is not intended for use by
persons (including children) with reduced
physical, sensory or mental capabilities,
or lack of experience and knowledge,
unless they have been given supervision or
instruction concerning use of the appliances
by a person responsible for their safety.
Always unplug from the socket when:
– not in use
– moving the article from one location to
another
– maintaining or servicing parts
– cleaning the article
Do not use when:
– plug or cord are damaged.
– the fan has fallen.
– the fan is not functioning properly.
– the fan is damaged in any way.
– Do not hang or mount the fan on a wall or
ceiling.
– Do not operate without fan if the grills are
not properly placed
– When the cord is damaged it must be
replaced by a certied electrician.
BODY ASSEMBLY
Step 1
1. Unscrew the Ring 3 and Base Locking Screw 4
from the Pole 5.
2. Insert the Pole 5 through the hole in the center of
the Stand Base 1, and twist into position.
3. Turn the Base 1 upside down with the Pole facing
the oor and place the Base Weight Support 2 on
the bottom of the Stand Base. Tighten the Base
Weight Support 2 to the Stand Base by the Ring
3 and Base Locking Screw 4. Use a plier to tighten
the Base Locking Screw.
Step 2
4. Unscrew the Tilt-Lock Nut 7 and the Tilt-Lock Knob
6 from the Motor Unit.
5. Put the Motor Unit 8 onto the Pole. Reinsert and
tighten the Tilt-Lock Nut 7 and the Tilt-Lock Knob
6.
FAN GRILL ASSEMBLY
Step 3
1. A
lign the Rear Grill
9
on the Motor Unit
8
, then screw
in the 4x Rear Grill Screws
10
to secure it in place. Make
sure the Grill Locking Screw
11
is at the bottom.
2. Install the Blade 12 onto the Motor Shaft by
tightening the Blade Screw 15 .
3. Centre the Front Grill 13 by aligning the central
logo so it is horizontal and parallel to the oor.
Then, secure the Front and Rear Grills completely
together by snapping 5x Grill Clips 14 into place.
Lastly, tighten the Grill Locking Screw 11 at the
bottom of the Rear Grill.
USERS INSTRUCTIONS
Place the ventilator on a solid, at surface. Put the
plug into a socket of 230 V ~50 Hz Volt.
The fan has the following speed options:
0 - O
1 - Low speed (light breeze)
2 - Normal speed
3 - High speed
The fan rotation can be turned on by pulling up on the
oscillation knob. Push the oscillation knob down to
turn the oscillation o. By loosening the tilting screw
the airow can be adjusted vertically.
3 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Excellent Electrics DE2-000100 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Excellent Electrics DE2-000100 in the language / languages: All languages as an attachment in your email.

The manual is 1.1 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info