800650
3
Zoom out
Zoom in
Previous page
1/44
Next page
Table fan – Instructions for use | 3
UK TABLE FAN
WARNING: NEVER PLUG IN THE FAN
WHEN IT IS DISMANTLED, THIS MAY
CAUSE ELECTRICAL HAZARDS. READ
AND SAVE THESE IMPORTANT SAFETY
INSTRUCTIONS BEFORE USING THIS FAN.
SAFETY PRECAUTIONS:
Only connect the fan to an earthed socket
with a corresponding voltage as indicated
on the article.
Use the fan only as described in this manual.
This product is intended for household use
ONLY. Not for commercial, industrial, or
outdoor use.
To protect against electrical shocks, do not
immerse unit, plug or cord in water or any
other liquids.
Do not spray the fan with liquids.
Do not cover the fan. Do not use in humid
spaces or near a sink.
Do not use in the presence of explosive and/
or ammable fumes.
Do not place the article or any part of it near
open re or another heat source.
Always place out of reach of children.
Always place on a stable surface. Remove all
objects in the direct vicinity of the article in
order not to block the swerving mechanism.
Never put anything through the ventilation
grill and always keep under supervision
when switched on.
Do not place near an open window.
This appliance is not intended for use by
persons (including children) with reduced
physical, sensory or mental capabilities,
or lack of experience and knowledge,
unless they have been given supervision or
instruction concerning use of the appliances
by a person responsible for their safety.
Always unplug from the socket when:
not in use
moving the article from one location to
another
servicing parts
cleaning the article
Do not use when:
plug or cord are damaged.
the fan has fallen.
the fan is not functioning properly.
the fan is damaged in any way. Do not hang
or mount the fan on a wall or ceiling. Do not
operate the fan if the grills are not properly
placed. When the cord is damaged it must
be replaced by a certied electrician.
ASSEMBLY INSTRUCTIONS
Step 1
1. Unscrew the Tilt-Lock Nut (7) and the Tilt-Lock
Knob (6) from the Motor Unit.
2. Put the Motor Unit (8) onto the Pole. Reinsert and
tighten the Tilt-Lock Nut (7) and the Tilt-Lock Knob
(6).
FAN GRILL ASSEMBLY
Step 2
1. Align the Rear Grill (9) on the Motor Unit (8), then
screw in the 4x Rear Grill Screws (10) to secure it in
place. Make sure the Grill Locking Screw (11) is at
the bottom.
2. Install the Blade (12) onto the Motor Shaft by
tightening the Blade Screw (15).
3. Centre the Front Grill (13) by aligning the central
logo so it is horizontal and parallel to the oor.
Then, secure the Front and Rear Grills completely
together by snapping 5x Grill Clips (14) into place.
Lastly, tighten the Grill Locking Screw (11) at the
bottom of the Rear Grill.
3


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Excellent Electrics DE2-000050 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Excellent Electrics DE2-000050 in the language / languages: All languages as an attachment in your email.

The manual is 1.5 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info