665089

Exakt PTV 700 Manual

8
Zoom out
Zoom in
Previous page
1/20
Next page
GB
© Precision Tools Ltd. 2010
8
i. Switch the appliance on to position “II”. (Fig. 13)
j. When the power tool is switched on the vacuum will switch on automatically.
k. When the power tool is switched o there is a short delay before the appliance switches
o. This delay allows remaining dust to be cleared from the power tool and hose.
5. Cleaning and Maintenance
Regular cleaning is essential for the safe operation of the appliance. Ensure the
pre-lter is clear of excess dust before each use.
Care must be taken not to inhale dust while emptying and cleaning the appliance.
The pre-lter is a consumable item and should be replaced if it becomes damaged or worn.
a. Unplug from mains supply. (Fig. 5)
b. Unclip the dust-collection bin retaining clips and lift o the motor unit. (Fig. 15, 16)
c. Safely dispose of the contents of the dust-collection bin.
d. Remove the pre-lter and gently beat the dust from it. This item can be hand washed in
water if excessively soiled. Ensure it is properly dried before re-tting.
e. Unclip the HEPA lter and clean by blowing or brushing. Ensure that it is clear of dust
internally before re-tting. (Fig. 17, 18)
f. Brush out the dust tank and brush the underside of the motor housing before re-assembly.
6. Troubleshooting
Warning; If a problem occurs switch o and unplug the appliance immediately.
Motor does not start:
• Try connecting to a socket that is known to work.
• Ensure switch is set to the correct position.
• If temperature cutout has operated, wait 20 minutes for it to reset.
Motor switches on but power is reduced, or motor is excessively noisy:
• Follow the procedure in section 5 for emptying and cleaning.
• Ensure none of the hoses or accessories are blocked.
7. Maintenance
The appliance is oiled for life.
Except for cleaning the lters, there are no user serviceable parts inside.
If the replacement of the supply cord is necessary, this has to be done by the manufacturer
or his service agent in order to avoid a safety hazard.
®
… 8 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Exakt PTV 700 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Exakt PTV 700 in the language / languages: English, German, French as an attachment in your email.

The manual is 2,18 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info