Manual Exakt EC-320 (page 2 of 40) (English, German, Dutch, French, Italian, Spanish)

665081

Zoom out

Zoom in

1/40

1  EXAKT Precision Tools Ltd. 2010

English

Warning Read all safety warnings and all

instructions. Failure to follow the warnings and instructions

may result in electric shock, fire and/or serious injury.

Save all warnings and instructions for future

reference.

EC-320 Safety Warnings –

Instructions for Putting Into Use

Setting up the Saw for Use

After unpacking check that there are no parts missing or

damaged. If there are contact supplier and do not operate.

Before using a blade needs to be fitted as described in the

operating instructions. (See Blade Changing Section) A

cardboard packing disk may be fitted in place of the blade,

which will need to be removed.

Information on Power Supply

This equipment should be connected to a normal domestic

socket outlet with a voltage rating between 210 and 250 V

and a current rating of between 13 and 16A.

Illustrated Description of Functions

1. Baseplate

6. and 7. Air vents

2. Guard lock (not shown)

8. Dust extract nozzle

3. Depth adjuster knob

9. Guard removal screw

4. Switch

10. Cutting width marks

5. Handle

11. Saw blade

List of contents

 1x EXAKT Precision Saw

 1x Torx key & 1x U key

 Blades (dependant on kit)

 1x Spare safety washer

 1x Standard blade guard

 1x Dust extraction hose

 1x Instruction manual

 1x Storage case

EC-320 Safety Warnings – Operating Instructions

This tool should always be used with the dust hose

connected and attached to a suitable vacuum cleaner/dust

extractor.

Setting the Cutting Depth

1. The depth of cut can be set in millimetres by turning the

depth control knob. (Diagram A)

2. The depth scale has long lines representing whole

millimetres and short lines for half millimetres. To set for

whole millimetres align the bottom edge of the depth

control knob on a long line and read off the number that

is just completely exposed.

3. When cutting wood the depth of cut should be set to

slightly greater than the thickness of the material for best

results.

4. When cutting plastics the depth of cut should be set to

slightly greater than the thickness of the material. If

melting occurs a greater depth setting will improve

results.

5. When cutting metals the depth of cut should be set to

approximately 1.0 mm greater than the material

thickness for best results.

If it is desirable not to mark the surface beneath the

workpiece, the depth can be set to the same as the material

thickness, when cutting wood or plastics, but this may result

in a rough edge.

NB. If the depth control knob becomes difficult to turn,

unscrew it until the rubber seal can be seen. Clean the

surrounding area with a soft brush and then apply a

very small quantity of synthetic grease to the seal.

Blade Changing

NB. Incorrect positioning of the blade can permanently

damage the tool.

1. Ensure the tool is unplugged from the mains supply.

2. Unscrew the depth adjuster until the number 12 is

visible.

3. Without removing the guard insert the U key into the

blade shaft to lock it. (Diagram B ) Slide off the

removable cover, insert the torx key into the blade

retaining screw and unscrew clockwise. (Diagram C)

4. Depress the guard to remove the blade.

5. Place the new blade onto the blade shaft ensuring the

hole locates correctly and the teeth point forwards in the

direction of the curved arrow. (Diagram C)

6. Replace the safety retaining washer and tighten the

screw. (Diagram D)

7. Remove both keys before plugging in.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Exakt EC-320 in the language / languages: English, German, Dutch, French, Italian, Spanish as an attachment in your email.

The manual is 1,06 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Exakt EC-320 Manual

Product: