460393
5
Zoom out
Zoom in
Previous page
1/48
Next page
5
Electrical Connection
It is recommended to connect the heater to its own
separate circuit.
A disconnecting device with at least 3 mm contact
clearance on each pole (e.g. automatic circuit-
breaker) is to be incorporated in the fixed wiring.
During the start-up of the heater, many times the rated
current will pass through it for a brief period of time,
the line fuse must be of the slow blow type. In
addition, suitable switches or switching devices (e.g.
contacts) must be provided.
Ensure that the mains voltage supplied corresponds
with the voltage specified on the name plate.
The heater must be installed in such a way that
switches or other controls cannot be touched by the
person using the bath or the shower.
This appliance must be earthed
Operation
The radiant heat of the appliance directly warms people
and objects without heating the air in-between.
The recommended mounting angle range lies between
20° and 40°.
Caution! Adjust angle only after appliance has been
allowed to cool down. Hazard of severe burns!
Adjust the desired heating level by pulling the pull cord.
The selected heat level will be displayed in the display
window on the front cover. When the highest heat setting
is selected and the pull cord is pulled again the appliance
is reset to position “0” and is turned off.
Technical Data:
Model IR118S IR118W IR218S
Rated
Voltage
203 - 240V / 50Hz
Heat
Settings
0-600-1200-
1800W
0-600-1200-
1800W
0-800-1200-
2000W
Dimensions
526.5 x 140 x
91mm
526.5 x 140 x
91mm
764 x 113.5 x
93mm
Weight 1.8Kg 1.8Kg 2.0Kg
IP Rating IP24 IP24 IP24
Warrenty 2 Years 2 Years 2 Years
Cleaning
Disconnect the heater from the power supply and allow to
cool down before undertaking any cleaning work.
Caution! Do not touch reflector and heating element with
your bare hands.
Wipe the outside of the appliance with a damp cloth and
subsequently wipe it thoroughly dry.
Do not use abrasives or caustic cleaning agents!
Do not use any flammable cleaning agents e.g. petrol or
spirit for cleaning the appliance.
Never immerse the appliance in water! Danger to life!
Dust that may have accumulated inside the heater can be
removed using a brush with long, soft bristles.
Recycling
For electrical products sold within the European
Community. At the end of the electrical products
useful life it should not be disposed of with
household waste. Please recycle where facilities
exist. Check with your local authority or retailer for
recycling advise in your country.
After Sales Service
All repairs must be referred to authorized personnel!
See your local dealer. Any tampering with the appliance
will invalidate the warranty. Repairs carried out improperly
and by unqualified persons may have serious
consequences for the user!
5


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for EWT IR218W at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of EWT IR218W in the language / languages: English, German, Dutch, Danish, French, Italian, Polish, Portuguese, Swedish, Spanish, Norwegian, Finnish as an attachment in your email.

The manual is 1,79 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info