to again heat . It is also possible to " heat storage function to use to allow the water to warm up . It is
also possible to replace the water in the air-conditioning system with hot water in order to switch back
to heating mode.
9. Ventilation
1. Press 【mode】to select the fan mode.
2. Press 【wind speed】to set the desired speed. There are three modes: low, high or
automatic.
3. Press【swing wind】to set the discharge blades in the correct position. The slats can
move up and down automatically in the swing position and can be locked in the desired position.
Note :
During the fan mode the actual air intake temperature is displayed
10. Preset
Preset:
1. Press 【preset】to select the preset mode and then select the cold storage preset or
the heat storage preset mode .
2. Press 【Preset】to confirm the preset cold storage or heat storage.
3. Press 【＋】or 【-】to select how many hours the mobile air conditioner should work
after the start of the preset ( cold or heat storage) function. Select a time interval between 6
and 24 hours. After selecting the desired time press 【Preset 】to confirm.
Cancel preset:
1. Press 【Preset 】the previous setting is canceled and select a new preset set.
2. After the mobile air conditioning has been disconnected from the power supply, the
preset is automatically canceled.
3. Press and hold the 【preset】button for more than 3 seconds to cancel the setting.
Pay attention:
