590562
12
Zoom out
Zoom in
Previous page
1/28
Next page
p. 12
WARNING: Always tighten fasteners to the correct torque. Bolts that are too tight can stretch and deform.
Bolts that are too loose can move and fatigue. Either mistake can lead to a sudden failure of the bolt, causing
you to lose control and fall.
Your dealer can also change the angle of the handlebar or bar end extensions.
WARNING: An insufficiently tightened stem clamp bolt, handlebar clamp bolt or bar end extension clamping
bolt may compromise steering action, which could cause you to lose control and fall. Place the front wheel of
the bicycle between your legs and attempt to twist the handlebar/stem assembly. If you can twist the stem
in relation to the front wheel, turn the handlebars in relation to the stem, or turn the bar end extensions in
relation to the handlebar, the bolts are insufficiently tightened.
D. Control position ADjustMents
The angle of the brake and shift control levers and their position on the handlebars can be changed. Ask your dealer
to make the adjustments for you.
If you choose to make your own control lever angle adjustment, be sure to re- tighten the clamp fasteners to the
recommended torque (follow the manufacturer’s instructions).
e. BrAke reACh
Many bikes have brake levers which can be adjusted for reach. If you have small hands or find it difficult to squeeze
the brake levers, your dealer can either adjust the reach or fit shorter reach brake levers.
4. teCh
A. Wheels
Bicycle wheels are designed to be removable for easier transportation and for repair of a tire puncture. In most cases,
the wheel axles are inserted into slots, called “dropouts” in the fork and frame, but some mountain and road bikes
use what is called a “through axle” wheel mounting system.
If you have a mountain or road bike equipped with through axle front or rear wheels, make sure that your
dealer has given you the manufacturer’s instructions, and follow those when installing or removing a through
axle wheel. If you don’t know what a through axle is, ask your dealer.
If you do not have a bicycle with a through-axle wheel mounting system, it will have wheels secured in one of three
ways:
• Ahollowaxlewithashaft(“skewer”)runningthroughitwhichhasanadjustabletensionnutononeend
and an over-center cam on the other (cam action system, fig.8 a & b)
• Ahollowaxlewithashaft(“skewer”)runningthroughitwhichhasanutononeendandattingforahex
key, lock lever or other tightening device on the other (through bolt, fig.9)
12


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for EVO 2014 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of EVO 2014 in the language / languages: English as an attachment in your email.

The manual is 1,03 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info