682439
31
Zoom out
Zoom in
Previous page
1/69
Next page
Reversing the door
The side at which the door opens can be
changed
, if the installation site
requires.
from the right side (as supplied)
to the left side
Tools you will need:
1. 8mm socket driver.
2.Cross-shaped screwdriver.
3.Putty knife or thin-blade screwdriver.
Before you start lay the refrigerator on it’s
back in order to gain access to the base, you
should rest it on soft foam packaging or
similar material to avoid damaging the cooling
pipes at the rear of the refrigerator.
1.Remove the upper hinge core, transfer it to
left side and tighten securely, then put it in a
safe place.
2. Remove both adjustable feet the bottom
hinge bracket and the
by unscrewing the bolts, then fit them on by
the following pictures.
rubber supporting pad
3. Replace the lid by fitting the upper hinge
core into the upper door's hole, securing it
with the 2 screws. Replace the screw
covers.
Warning!
When changing the side at which the
door opens, the appliance must not be
connected to the mains. Remove plug
from the mains beforehand.
13
31


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Everglades EVTT121 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Everglades EVTT121 in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 3,09 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info