516579
8
Zoom out
Zoom in
Previous page
1/63
Next page
8
4.
Apply blanking covers (B)as indicated.
5.
Separate parts A,B,C,D as shown in
the figure.
6.
Place guide (A) on the side part of the
furniture door, up and down as shown in
the figure and mark the position of
external holes. After having drilled holes,
fix the guide with the screws supplied.
7.
Fix cover ( C ) on guide (A) until it clips
into place.
8.
Open the appliance door and the
furniture door at 90°.Insert the small
square (B) into guide (A) .Push together
the appliance door and the furniture door
and mark the holes as indicated in the
figure remove the squares and drill holes
with ij2 mm at 8 mm from the outer edge
of the door . Place the small square on
the guide again and fix it with the screws
supplied.
9.
Should the lining up of the furniture
door be necessary , use the clearance of
slots .At the end of operations, it is
necessary to check the door of the
furniture closes properly.
8


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Everglades EVBi 630 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Everglades EVBi 630 in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 2,84 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info