814561

Everglades EVBA0106 Manual

51
Zoom out
Zoom in
Previous page
1/78
Next page
Brief introduction
Reversing the door
The side at which the door opens can be
changed from the right side (as supplied) to the
left side, if the installation site requires.
Tools you will need:
1. 8mm socket driver
2. Cross-shaped screwdriver
3. Putty knife or thin-blade screwdriver
Before you start lay the refrigerator on it’s back in
order to gain access to the base, you should rest
it on soft foam packaging or similar material to
avoid damaging the cooling pipes at the rear of
the refrigerator.
13
①screw hole cover ②
③
upper hinge cover
④upper hinge part
⑤ ⑥
⑦
special flange self-tapping screw
special flange self-tapping screw
adjustable foot
lower hinge parts
1. Open the refrigerator door and remove all the items
on the door;
2. Remove the upper hinge cover (2); Remove two
screws (3); Remove the upper hinge part (4);
3. Take the door up carefully and place the door on the
ground with a soft surface to prevent the surface of the
door from being scratched;
4. Remove the screw hole cover (1) and transfer it to
the corresponding hole on the right, be sure to firmly
press it into the hole;
5. Remove the two screws (6) at the bottom;
6. Remove the lower hinge parts (5) at the bottom;
7. Remove the left adjustable foot (7) at the bottom,
transfer it to the hole corresponding to the bottom on
the right;
8. Install the previously removed lower hinge parts (5)
into the corresponding hole on the left side of the
bottom, and tighten the screw (6);
9. Install the left hole at the bottom of the door into the
lower hinge parts and close the door;
10. Install the previously removed upper hinge part (4)
to the corresponding hole position on the left side,
screw the screw (3), do not tighten it first, and tighten
the screw when the door is in the horizontal position;
11. Install the previously removed upper hinge cover
(2) to the corresponding position on the left;
12. The end of changing the door.
… 51 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Everglades EVBA0106 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Everglades EVBA0106 in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 2.05 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info