647165
146
Zoom out
Zoom in
Previous page
1/165
Next page
ENVR8304D-8CH
137
Pattern Tour:
Figure 7-25
Pattern: You are given 90 seconds to move the camera (via the PTZ buttons) to different positions
(and different zoom / focus / Iris positions). The camera then saves that sequence under the Pattern
No. you’ve selected. Up to 4 Patterns can be configured.
To set up a Pattern Sequence:
5. Select a pan and tilt speed from the Speed drop-down list for the camera to move to the
directions when you use the direction buttons during the configuration period.
6. Select a pattern number from the Pattern No drop-down list.
7. Click the Set button to start the 90-second configuration period. Use the direction / zoom /
focus / Iris buttons to move the camera in the desired sequence.
8. Click the Complete button again to end the configuration.
Click Clear can void the configuration for the entered Pattern No. Click Go to view/test the
configured Pattern sequence.
To activate the Pattern function on the PTZ Live View window, click the PTZ icon on the
Menu Bar. Click the Pattern button, click on the numeric buttons to select a Pattern number and
then click the Go button. The camera will move to the positions in the Pattern sequence you
have configured. To stop the Pattern function, click the Stop button on the PTZ Control
panel. Please refer to 7.6 PTZ for detailed instructions.
146


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for EverFocus ENVR8304D at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of EverFocus ENVR8304D in the language / languages: English as an attachment in your email.

The manual is 5,74 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info