738404
14
Zoom out
Zoom in
Previous page
1/15
Next page
Ed : 03/17 Rev : 00
INSTRUCTION
3
Input supply voltage220V Working temperature: 0-40
Speed range: 0.8-14KM/H Incline range: 12-section of motor incline
Max. user weight: 100kg Distance display range: 0.00-99.9km
Calories display range: 000-999
Time display range: 0000-9959 (min : sec)
Heart rate range: 50-200 (time / min) Running surface: 400*1200mm
Product size: 1560*710*1330mm Folding size: 760*710*1470mm
Technical Parameters
Product Overview
Computer
Upright
Handrail
Motor cover
End cap
Running belt
Side rail
Safety key
Base fram
e
Main frame
4
WHEN YOU OPEN THE CARTON, YOU WILL FIND THE BELOW SPARE PARTS:
STEP 1: Take out and prepare the below parts
Main frame 1 set
D17 Inner star washer
M8 10 PCs
D13 Round hex bolt
M8*15 10 PCs
C13 Safety key
1 PC
D3 Allen wrench
5MM, 1 PC
B18 Silicon 1 PC
A3L/A3R Left/right
Uprights 2PCS
Handrail/console
bracket
B49 Water bottle cup
holder 2 PCs
Note: Do not tighten all the bolts at once in the beginning of assembling. Please
tighten them after all the parts are placed on the correct position.
Assembly
instruction
5
STEP 2: Connect lower cable (C17) and connecting cable (C18), and then tighten left/right
uprights (A3L/R) with bolt M8*15 (D13) and inner star washer (D17).
STEP 3: Connect upper cable (C16) and connecting cable (C18), and then place the
handrail/console bracket on the left/right uprights (A3L/A3R) with bolt M8*15 (D13) and inner star
washer (D17).
C18
D13
D13
D17
D13
D17
A3R
D13
D13
D17
A3L
C17
C18
D13
C16
6
Step 4: Place on safety key (C13) and water bottle holder (B49).
Step 5: To check if the running belt runs correctly, placing treadmill in folding position and
tightening all the bolts. Then set speed under 3km/h and see if running belt runs without
problem.
7
Lift up the machine and force to pull up until
you heard "click" that made by safety casing
stuck the pneumatic cylinder.
Kick the safety sleeve lightly and pull
down the machine at the same time as the
arrow direction. Then the machine will fall
down smoothly.
Unfolding instruction
F
olding
I
nstructio
n
9
1.1. WINDOW DISPLAY
1.1. Console
1.2. START
Normal start after 5 seconds countdown
1.3 PROGRAM
12 pre-set programs, 1 body fat program , 3 countdown function
1.4. SAFETY LOCK FUNCTION
The window shows"---" when take away the safety lock and the treadmill will stop quickly with "didi"
alarm noise. And put the safety lock on, the computer will display for 2 seconds and the date count
down to “0”
1.5.BUTTON FUNCTION
1.5.1. START/STOP
“START”--When the treadmill is not running, press this button to start, speed is “0.8”
“STOP”--When the treadmill is running, press this button to stop, then set program default and then
return to manual mode after stopped.
1.5.2 “PROGRAM” BUTTON
Operation Guide
10
When the treadmill is not running, press this button can choose from program circle mode to manual mode
(P1-P12). The lowest speed for manual mode is “0.8”, and the highest speed is “14”. The lowest incline
section is “0”, and the highest incline section is “12”.
1.5.3 “MODE” BUTTON
When the treadmill is not running, press this button to choose countdown
modes:”H-1”,”H-2”,”H-3”.
H-1” is the time countdown mode, and “H-2” is the distance countdown
mode, “H-3” is the calories countdown mode.
Press the “SPEED+/-” or “INCLINE+/-“button to adjust
the data. After that, press the “START” button to start this treadmill
1.5.4 “SPEED +/- “BUTTON
SPEED +/– --Adjust speed when treadmill start, the increment is 0.1km/time in kilometer. Press the
button more than 2 seconds, and it will be up or down automatically.
1.5.5 “INCLINE +/- “BUTTON
INCLINE +/– -- Adjust incline when treadmill start, the increment is 1 level/time in kilometer. Press the
button more than 2 seconds, and it will be up or down automatically.
1.5.6 SPEED QUICK BUTTON
Press the speed quick button 4km/h, 6km/h, 8m/h, 10m/h, 12m/h to adjust the speed directly when the
treadmill is running
1.5.7 INCLINE QUICK BUTTON
Press the incline quick button 4, 6, 8, 10, 12 to adjust the incline directly when the treadmill is running
1.6. DISPLAY FUNCTION
1.6.1 TIME
Display the running time or countdown time
1.6.2 SPEED
Display running speed
1.6.3 INCLINE
Display the incline
1.6.4
PULSE
Display pulse data
11
1.6.5 DISTANCE
Display the running total distance or distance countdown.
1.6.6 CALORIES
Display the calorie or calorie countdown
1.6.7 SPEED DIAGRAM
Display the diagram of the running speed
1.6.8 WINDOW DISPLAY DATA RAGNE
TIME0:00 – 99.59(MIN)
DISTANCE: 0.00 – 99.9(KM)
CALORIES: 0.0 – 999 (C)
SPEED:0.8 -12 (km/h)
PULSE: 50 – 200 (BPM)
1.7 PULSE FUNCTION
When the treadmill is running, hold the hand pulse about 5 seconds, it will display pulse data. The
pulse data range is 50-200 times/ minute. It has heart-shaped graphics when testing pulse. This
data is only for reference, can not be as medical data.
1.8 PROGRAM EXERCISE CHART
There are 10 sections in each program.
TIME
PROG
SET TIME / 16 = TOTAL TIME IN EACH OPERATION
1
2
3
4
5
6
7
8
9
10
P1
SPEED 3 3 6 5 5 4 4 4 4 3
INCLINE
0
3 3 3 4 4 4 1 1 0
P2
SPEED 3 3 4 4 5 5 5 6 6 4
INCLINE 2 2 2 3 3 3 3 4 4 2
P3
SPEED 2 4 6 8 7 8 6 2 3 2
INCLINE 3 5 4 4 3 4 4 3 4 2
P4
SPEED 3 3 5 6 7 6 5 4 3 3
INCLINE 0 3 3 2 2 5 5 3 3 2
P5
SPEED
3
6
6
6
8
7
7
5
5
4
INCLINE
3 5 3 4 2 3 4 2 3 2
P6
SPEED 2 6 5 4 8 7 5 3 3 2
INCLINE 3 4 5 6 3 5 5 6 4 3
P7
SPEED 2 9 9 7 7 6 5 3 2 2
INCLINE 0 3 3 3 4 4 4 1 1 0
12
P8
SPEED 2 4 4 4 5 6 8 8 6 2
INCLINE 1 1 4 4 4 5 5 4 3 2
P9
SPEED 2 4 5 5 6 5 6 3 3 2
INCLINE 3 5 3 4 2 3 4 2 3 2
P10
SPEED 2 5 7 5 8 6 5 2 4 3
INCLINE 1 5 6 8 12 9 10 9 5 3
P11
SPEED 2 5 6 7 8 9 10 5 3 2
INCLINE
3
5 6 8 6 5 8 7 5 2
P12
SPEED 2 3 5 6 8 6 9 6 5 3
INCLINE 5 7 5 8 6 5 9 10 6 2
1.9 THREE COUNTDOWN FUNCTION PARAMETER DATA
Countdown time initial setting 1000 minutessetting range 500---9900 minutes , each step 100.
Countdown calorie initial setting 50therm, setting range 20---990 termeach step 10.
Countdown distance initial setting 1.0kmsetting range 1.0--99.9 kmeach step 0.1
Cycle switch order is: manual, time, distance, calories.
1.10 BODY TESTER
FAT
At the beginning state, press “ PROGRAM” continually to enter “FAT“ body fat testwindow display
“FAT”. Press “MODE” to enter (F1 SEX, F2 AGE, F3 HEIGHT, F4 WEIGHT). Press “SPEED+”,
“SPEED-” to set. After setting, the computer will display F5 and grasp the hand pulse, the window
will display your body quality index.
The body quality index is to test the relation between height and weight not the body scale.
The body FAT suits for any male and female to adjust the weight according together with other
body quality index. The ideal FAT should be between 20-25, if under 19, it means too thin. If
between 25 and 29, it means overweight, if over 30, it means obesity. (The data is just for
reference and can not be as medicinal data)
01 Sex 01 Male 02 Female
02 Age 10------99
03 Height 100----200
04 Weight 20-----150
05 FAT 19 Under weight
FAT = (20---25) Normal weight
13
FAT = (25---29) Over weight
FAT 30 Obesity
1.11 OTHERS
1.11.1 When the countdown mode is finished and “END” appears on screen, warning sound occurs.
Then it will be back to manual mode.
1.11.2 You can set statistics at circled mode. Ex: When time is set at 5:00 – 99:00 and it hits 99:00,
press “+” button, it will start from 5:00 again.
1.11.3 Countdown time, countdown calorie and countdown distance, you just can set one of them at
a time, press last item to set running, the setting parameter is countdown, others display normal
data.
1.11.4 Speed increases at 0.5km/s, and decreases at 0.5km/s.
19
Exploded Drawing
20
A. Welding parts
No. Description QTY NO. Description QTY
A1 Main frame 1
A4
Handrail/console bracket 1
A2 Base frame 1
A5
Incline bracket
1
A3L Left upright 1
A6
Filter bracket
1
A3R Right upright 1
A11
Motor bracket
1
B. Plastic parts
No. Description QTY No. Description QTY
B1
Console set
1
B16L
Left end cap
1
B1-1
Overlay
1
B16R
Right end cap
1
B1-2
Membrane key
1
B17
Adjusting wheel
2
B1-3
Console
1
B18
Silicon oil 1
B1-5
iPad holder
1
B19
Cable organizer 1
B2
Console cover
1
B20
Round plug
2
B3
Protecting foam
2
B21
Square plug
4
B4
Handrail plug
2
B28
Square plug
8
B7 Transporting wheel
2
B34
EVA pad (for iPad
holder)
1
B8
Flat foot pad
4
B36
Inner round plug
1
B10
Limited cushion
2
B45
Console back cover
1
B13
Motor upper cover
1
B49
Water bottle holder
2
B14 Motor lower cover
1
B15 Side rail
2
C. Electric and drive parts
No. Description QTY No. Description QTY
C1
DC motor
1
C13
Safety key 1
C2
Running belt
1
C14
Single cord
1
C3
Rear roller
1
C15
Power cable
1
C4
Front roller
1
C16
Upper cable
1
C5 Running deck
1
C17
Lower cable
1
C6
Cylinder
1
C18
Connecting cable
1
C7
Drive belt
1
C20
Magnetic ring
1
C8
Power switch
1
C21
Inductor
1
Parts list
21
C9
Controller
1
C22
Filter
1
C10
Button on left handrail
1
C27
Single cord
2
C11 Button on right handrail
1
C12
Incline motor
1
D. Hardware parts
No. Description QTY No. Description QTY
D3
Allen wrench T5
1
D29
Hex round head bolt M6X45
1
D9
Round hex bolt M10X30
1
D30
Hex round head bolt M6X60
2
D10
Round hex bolt M10*45
4
D31
Hex round head bolt M8X20
4
D11
Round hex bolt M10*50
1
D32
Hex round head bolt M8X45
1
D13
Round hex bolt M8X15
10
D43
Cross head bolt
M4X20
2
D14
Round hex bolt M8X30
1
D44
Cross head bolt M5X12
1
D15
Round hex bolt M8X40
4
D45
Cross head bolt M5X15
6
D16
Round hex bolt M8X45
1
D46
Cross head bolt M5X20
4
D17
Inner star washer M 8
10
D47
Cross self-tapping bolt
ST4.2X16, washer
12
D18
Nylon nut M10
6
D52
Cross head bolt ST4.2X16
15
D20
Nylon nut M8
6
D57
Cross self-tapping bolt
ST4.2X25
2
D21
Flat washer M 10
6
D58
Cross self-tapping bolt
ST3.5X16
2
D23
Flat washer M 8
11
D61
Cross self-tapping bolt
ST4.2X19
2
D24
Spring washer M5
1
D84
Cross head bolt M6X35
8
D25
Spring washer M8
4
GARLANDO SPA
Via Regione Piemonte, 32 - Zona Industriale D1
15068 - Pozzolo Formigaro (AL) - Italy
www.evert.it - info@evert.it
14


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Everfit TFK 330 EVO at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Everfit TFK 330 EVO in the language / languages: English as an attachment in your email.

The manual is 3,16 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info