Manual Everdure Hub II (page 5 of 24) (English)

798842

Zoom out

Zoom in

1/24

Assembly, Operation & Maintenance Instructions

19. Do not use or store this appliance in areas of high salt content (a marine environment)

or an area with caustic fumes or liquids (such as a domestic pool), as these chemicals

can cause the appliance materials to deteriorate (and void the warranty). Regular

cleaning and covering with an Everdure by Heston Blumenthal HUBTM barbeque cover

can help can help to reduce this.

20. Caution: Accessible parts may become hot when used. Whilst the grill handles are cool

to touch, please be aware that the grill surface will be hot - handle with care.

21. Charcoal and coal products produce carbon monoxide when burned. When the

appliance is being used with solid fuels, always keep the appliance in a well ventilated

area to prevent the gasses produced from building up.

22. Do not use solid fuels impregnated with re accelerants or use any other type of

accelerant on this appliance. This appliance is designed for electrical charcoal ignition

only. Using any accelerant could cause serious property damage or personal injury.

WARNING! Do not use spirit or petrol for lighting or re-lighting! Do not use relighters

for lighting or re-lighting!

23. During ignition, follow the recommended charcoal area placement guide. Once the

initial batch of charcoal has ignited, it can be mixed in with fresh charcoal and spread

throughout the charcoal chamber. Overloading the charcoal chamber can result in

damage to the appliance and food – it is recommended that the height of the charcoal

never passes the top level of the charcoal chamber. For more information on charcoal

placement, see further on in the instruction manual and the Quick User Guide.

24. The ignition timer is set to 7 minutes. Whilst this in operation, the element will run,

heating and igniting the charcoal above it. Once the timer has nished, do not start

again as the heat from the element will interfere with the natural progression of the

charcoal ashing. Note: If the combined heat from the charcoal and element get too

high, an over-temp switch will disable the element (the timer will continue to operate

until the 7 minutes have elapsed).

25. Always allow the solid fuel to burn out naturally after cooking. Do not use any liquids

to douse the charcoal whilst inside the barbeque. Do not move the appliance while

the coals are still burning as hot ash, coal particles, unburned fuel and hot cooking fats

& oils could spill and accessible parts may be very hot. The barbeque should not be

moved by lifting.

26. Do not use volcanic rock or any type of non-combustible product in the charcoal

chamber. If in doubt on what fuels can be used, check the Everdure by Heston

Blumenthal website or contact the Service Department.

27. Solid fuels dier widely in burning time, heat, size and combustion. Always be aware

of your surroundings and potential re hazards caused by sparks or spitting fuels.

Never dispose of solid fuels or hot ashes in areas where they can be trodden on or

be a re hazard. Never dispose of unburned solid fuels or ash until it has completely

extinguished. The barbeque must be installed on a secure level base prior to use. We

recommend using 100% natural lump charcoal in this appliance (see everdurebyheston.

com.au/ everdurebyheston.com.nz).

28. Always check with your local/state authorities before using this appliance for any

re restrictions regarding the use of an outdoor barbeque (due to local weather

conditions).

29. When using solid fuels, take care that the surrounding environment is clear of

combustible materials. Do not cook under overhanging buildings or close branches

of trees. Note that solid fuels will produce varying amounts of smoke – take this into

consideration when setting up the barbeque.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Everdure Hub II in the language / languages: English as an attachment in your email.

The manual is 3.42 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Everdure Hub II Manual

Product: