798844

Everdure Fusion Manual

3
Zoom out
Zoom in
Previous page
1/13
Next page
54 Assembly, Operation & Maintenance InstructionsAssembly, Operation & Maintenance Instructions
IMPORTANT SAFETY INSTRUCTIONS
IMPORTANT:
Read the safety precautions of this booklet carefully before removing the barbeque
from its carton or connecting the barbeque to the power supply. If you are unsure
about anything regarding your barbeque, please contact Everdure by Heston
Blumenthal in Australia on 1300 HESTON or in New Zealand on (09) 415 6000 before
operating your appliance.
1. This electric ignition charcoal barbeque and pedestal set are intended for OUTDOOR
USE ONLY. Do not use indoors!
2. For your safety and enjoyment, read all operating instructions before using this
appliance.
3. In certain circumstances electrical appliances may be a health hazard. Unplug the
appliance before cleaning or carrying out maintenance. When the appliance is not in use,
unplug the appliance from the outlet and retract the power chord fully.
4. This appliance is not intended for use by persons (including children) with reduced
physical, sensory or mental capabilities, or lack of experience or knowledge, unless
they have been given supervision or instruction concerning the use of the appliance
by a person responsible for their safety. Children should be supervised to ensure that
they do not play with the appliance. Unsupervised children or pets should not be near
a barbeque while cooking or during warm up or cool down. Ensure children or pets are
kept a distance well away from the barbeque whilst it is in use. WARNING! Keep children
and pets away.
5. Ensure that all electrical connections are secure, dry and protected from moisture before
operating this appliance. Do not disconnect the appliance with wet hands and do not
disconnect the power cord with extreme force.
6. Always fully extend the retractable power cord when in use (leaving the power cord fully
or partially retracted can cause the cord to overheat & become damaged). Take care
not to exert undue force on the cord and its assembly when adjusting the length. If use
of an extension power lead cannot be avoided, always use good quality (low resistance)
leads that are suitable for the environment where cooking is taking place, and use the
shortest length possible to reduce any power lost to the appliance.
7. Do not use this appliance with a programmer, timer or any other device that switches
the appliance on automatically, since a re risk exists if the appliance is covered or
positioned incorrectly.
8. If the power cord is damaged, it must be replaced by the manufacturer, an authorised
service centre or similarly qualied persons to avoid a hazard.
9. Do not immerse the barbeque in water (only removable grills, charcoal grids and
rotisserie parts can be immersed).
10. As charcoal can smoulder for an extended period of time, take care when removing ash
after cooking. It is recommended that a non-combustible container (metal or ceramic)
be used to contain any ash before being doused in water and disposed of correctly.
11. This barbeque has been designed to be used either on a FUSIONTM pedestal, a raised
bench or the ground. When using a raised surface (table etc.) or the ground, ensure
the surface is level, large enough and strong enough to support the barbeque and
will withstand temperatures of 80°C above ambient temperature. When using the
pedestal, ensure that your barbeque is in a level position and the barbeque is positioned
fully on the pedestal.
12. People with ammable clothing such as nylon etc. should keep well away from the
barbeque when it is operating.
13. Do not use this appliance for any purpose other than what it is intended for.
14. In case of fat re, remove food (if possible) and allow the re to burn out naturally.
Most fat will burn o quickly when it contacts the charcoal, but regular cleaning after
use should reduce the build-up of fat and food residues which are combustible and can
result in a fat re. Fat res can be prevented with diligence in cleaning fats and oil
from the heat shield and bowl around the electrical element and the inner chassis.
Do not allow ash to build up inside the chassis – clean up after every use. For more
information on controlling fat res see the Quick User Guide.
15. Ensure that the product has adequate clearance from combustible materials. The
appliance is designed so that heat will not aect the pedestal. All combustible materials
must be kept more than 250mm from the sides and rear of the barbeque and more
than 1500mm above the cooking surface of the barbeque.
16. Keep your barbeque protected against strong wind where possible (the lid can be used
as a rear wind shield by hanging it from the bracket at the rear of the appliance). As
charcoal cooking can vary in time and intensity, it is recommended that the barbeque
not be left for more than 5 minutes at a time while cooking.
17. We recommend that you regularly maintain your barbeque and keep it in good condition.
This can be achieved by following the cleaning and maintenance suggestions in this
booklet. Failure to follow these instructions will void your warranty.
18. This appliance is not suitable for mounting in a movable vehicle (boat, trailer etc).
19. Do not use or store this appliance in areas of high salt content (a marine environment)
or an area with caustic fumes or liquids (such as a domestic pool), as these chemicals
can cause the appliance materials to deteriorate (and void the warranty). Regular
cleaning and covering with an Everdure by Heston Blumenthal barbeque cover can help
can help to reduce this.
20. Caution: Accessible parts may become hot when used.
21. Charcoal and coal products produce carbon monoxide when burned. When the
appliance is being used with solid fuels, always keep the appliance in a well ventilated
area to prevent the gasses produced from building up.
22. Do not use solid fuels impregnated with re accelerants or use any other type of
accelerant on this appliance. This appliance is designed for electrical charcoal ignition
only. Using any accelerant could cause serious property damage or personal injury.
WARNING! Do not use spirit or petrol for lighting or re-lighting! Do not use relighters
for lighting or re-lighting!
23. During ignition, follow the recommended charcoal area placement guide. Once the
initial batch of charcoal has ignited, it can be mixed in with fresh charcoal and spread
throughout the charcoal chamber. Overloading the charcoal chamber can result in
damage to the appliance and food – it is recommended that the height of the charcoal
never passes the top level of the charcoal chamber. For more information on charcoal
placement, see further on in the instruction manual and the Quick User Guide.\
24. The ignition timer is set to 7 minutes. Whilst this in operation, the element will run,
heating and igniting the charcoal above it. Once the timer has nished, do not start
again as the heat from the element will interfere with the natural progression of the
charcoal ashing. Note: If the combined heat from the charcoal and element get too
high, an over-temp switch will disable the element (the timer will continue to operate
until the 7 minutes have elapsed).
25. Always allow the solid fuel to burn out naturally after cooking. Do not use any liquids to
douse the charcoal. Do not move the appliance while the coals are still burning as hot
ash, coal particles, unburned fuel and hot cooking fats & oils could spill and accessible
parts may be very hot. The barbeque should only be lifted by the base at either side. If
a pedestal is available, move the barbeque and pedestal separately.
26. Do not use volcanic rock or any type of non-combustible product in the charcoal
chamber. If in doubt on what fuels can be used, check the Everdure By Heston
Blumenthal website or contact the Service Department.
27. Solid fuels dier widely in burning time, heat, size and combustion. Always be aware of
your surroundings and potential re hazards caused by sparks or spitting fuels. Never
dispose of solid fuels or hot ashes in areas where they can be trodden on or be a re
hazard. Never dispose of unburned solid fuels or ash until it has completely extinguished.
The barbeque must be installed on a secure level base prior to use. We recommend using
100% natural lump charcoal in this appliance (see everdurebyheston.com).
28. Always check with your local/state authorities before using this appliance for any re
restrictions regarding the use of an outdoor barbeque (due to local weather conditions).
29. When using solid fuels, take care that the surrounding environment is clear of
combustible materials. Do not cook under overhanging buildings or close branches
of trees. Note that solid fuels will produce varying amounts of smoke – take this into
consideration when setting up the barbeque.
3 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Everdure Fusion at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Everdure Fusion in the language / languages: English as an attachment in your email.

The manual is 4.68 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info