Igniter is not sparkingRemove plate and visually check ignition box for a spark. Check that the cables to ignition point, or from the valve to the chassis have not broken or
disconnected. Also check the alignment of the sparker. If there is no spark, contact Everdure by Heston Blumenthal Service.
Injector is blockedClean injector with a toothbrush. Do not drill out or use wire. Do not remove injector. Contact Everdure by Heston Blumenthal Service.
TROUBLESHOOTING
Burner will not ignite when using the igniter:
Burner ame is erratic:
Gas is leaking from connections:
Burner is blockedRemove cooking surface and check burner for obstruction. Clean ports.
Flame is burning inside
burner (hissing sound)
Turn o burner, allow to cool and re-ignite (page 7)
Regulator is faultyContact Everdure by Heston Blumenthal Service.
Injector is partially blockedClean injector with a toothbrush. Do not drill out or use wire. Do not remove injector. Contact Everdure by Heston Blumenthal Service.
Connections are looseTighten loose connections (do not over-tighten) and leak test under pressure with soapy water solution (page 4)
Hose has deterioratedContact Everdure by Heston Blumenthal Service - replace.
Gas valve is faultyContact Everdure by Heston Blumenthal Service.
Threads are damagedContact Everdure by Heston Blumenthal Service.
BARBEQUE AND STAND ASSEMBLY
The barbeque and hood come fully assembled, with the gas hose connected to the inlet manifold. To assemble, the stand must rst be built (note: for transportation reasons, the
barbeque is packaged bolted to the stand top, and should be removed before attempting to assemble the stand). The barbeque is placed back inside the stand after it has been
assembled and reattached (it can be removed to cook from a raised bench). Only a medium size Philips screwdriver is needed. Open the carton from the top and remove the parts.
Remove all packaging (especially check inside the barbeque chassis) and place parts on a clean surface. Check for any damage or missing parts (if found, contact your service
department).
INCLUDED PARTS FORCETM AND FURNACETM
PACKAGING
Remove all internal cartons and packaging from within the barbeque/hood assembly. Remove all external packaging and remove the appliance from the packaging base before
operation. Recycle as per your local government laws.
Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.
Product:
Forumrules
To achieve meaningful questions, we apply the following rules:
First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.
Register
Register getting emails for Everdure Furnace at:
new questions and answers
new manuals
You will receive an email to register for one or both of the options.
Get your user manual by e-mail
Enter your email address to receive the manual of Everdure Furnace in the language / languages: English as an attachment in your email.
The manual is 6.19 mb in size.
You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.
The manual is sent by email. Check your email
If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.
The email address you have provided is not correct.
Please check the email address and correct it.
Your question is posted on this page
Would you like to receive an email when new answers and questions are posted? Please enter your email address.
