802153
18
Zoom out
Zoom in
Previous page
1/20
Next page
Connect the Genius, Power Box, Solid Core 3-Phase CTs
and CT Hub via the supplied bus cables as depicted.
Connect the EV charger to the Genius via a CAT 5/6 RS-
485 cable. Attach the supplied RJ10 connector to the cable
using a proper crimping tool. Respect the color codes as
shown on the wiring table.
Conrm that the same three wires are used for both the
connection with the RJ10 connector and the EV charger
connection.
Connect EVBox Smart Charging+ to the internet via an
Ethernet cable (recommended) or Wi-Fi. The Ethernet cable
must be connected before powering up the EVBox Smart
Charging+ device.
Once all cables are connected, switch on the power.
Download the “Smappee Energy Monitor” app and log in
with the system-generated username and password. Follow
the installation instructions to correctly congure the Wi-Fi
credentials (if needed) and the overload protection settings.
Write down the maximum current of the main circuit breaker
on the member card.
Once the Genius module shows a green breathing light,
validate the installation by verifying that the real-time
bubbles show accurate values in the app.
Hand the member card to the customer. The system-
generated username, password, and e-mail address can be
changed. The new details should be written down on the
member card.
2
3
4
5
6
7
18


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for EVBox Smart Charging at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of EVBox Smart Charging in the language / languages: English as an attachment in your email.

The manual is 3.25 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of EVBox Smart Charging

EVBox Smart Charging Installation Guide - English - 5 pages

EVBox Smart Charging Installation Guide - English - 46 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info