668822
26
Zoom out
Zoom in
Previous page
1/47
Next page
04. PRODUCT USE
25
Description of Panel
BUTTON 1 (P1) - Temperature increase:
When in programming mode, use this button to modify/increase the selected menu value. When in working
mode/switched off, use instead this button to increase the stove temperature value.
BUTTON 2 (P2) - Temperature decrease:
When in programming mode, use this button to modify/decrease the selected menu value. When in working
mode/switched off, use instead this button to decrease the room thermostat temperature value.
BUTTON 3 (P3) - Set/menu:
Use this button to access temperature setting and user and technician parameter menu. After entering the menu,
use this button to access the next sub-menu or set the value and move to the next menu item when in programming
mode.
BUTTON 4 (P4) - ON/OFF Release:
Hold this button down for two seconds to manually switch the stove on or off respectively depending on its initial
status (switched on or off).
Should have any alarm blocked the stove, press this button to unlock it and subsequently switch it off. After entering the menu or during
the programming phase, use this button to access the upper menu level. Any change is automatically saved
BUTTON 5 (P5) - Heat output decrease:
When in working mode, use this button to decrease the heat output value. In menu mode, use this button to move
to the next menu item or, in programming mode, to go back to the subsequent sub-menu item. Any change is
automatically saved.
BUTTON 6 (P6) - Heat output increase:
When in working mode, use this button to modify the exchanger speed. In menu mode, use this button to go back
to the previous menu item or, in programming mode, to go back to the previous sub-menu item. Any change is
automatically saved.
The menu
Press the P3 (MENU) button to access the menu.
It includes several items and levels to access settings and control board programming.
The menu items providing access to the technical setting are protected by access code.
User menu
The table below briefly describes the menu structure, focusing in particular on the functions available to users.
The menu item 01-fan adjustment is only available if the corresponding function has been enabled.
26


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Eva Calor Tosca 24 kW at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Eva Calor Tosca 24 kW in the language / languages: English as an attachment in your email.

The manual is 4,1 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Eva Calor Tosca 24 kW

Eva Calor Tosca 24 kW User Manual - German - 38 pages

Eva Calor Tosca 24 kW User Manual - Dutch - 90 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info