668823
17
Zoom out
Zoom in
Previous page
1/55
Next page
4.5 Fume exhaust duct
4.5.1 General notes
CAUTION: the pellet stove is not like other stoves. Fume draft is forced thanks to a fan that
maintains the pressure in the combustion chamber and slight pressure around the exhaust
duct. Therefore, you must verify that the latter is completely watertight and properly installed,
both from the point of view of function and safety.
Construction of the exhaust duct must be done by specialised personnel or companies, as reported
in the following manual. Always create the exhaust system so that periodic cleaning is assured
without having to dismantle any parts.
Tubes must ALWAYS be sealed with silicone (no cementing) that maintains resistance and
elasticity characteristics at high temperature (250°C) and are to be secured with a Ø3.9mm self-
tapping screw.
- The installation of dampers or valves which may obstruct the passage of exhaust fumes is
prohibited.
- Installation in a chimney flue where exhausted fumes or vapours from other equipment (boilers,
hoods, etc.) is prohibited.
4.5.2 Tubes and maximum usable lengths
Painted aluminised steel tubes (minimum thickness 1.5 mm), stainless steel tubes (Aisi 316) or
porcelain tubes (minimum thickness 0.5 mm) with a nominal diameter of 80 mm or 100 mm (for
tubes inside the chimney flue max 150 mm) can be used.
Flexible hoses are permitted if they fall within the limits prescribed by law (in stainless steel with
smooth inner wall). The male-female connection collars must be at least 50 mm long.
Tube diameter depends on the type of system. The stove has been designed for Ø 80 mm and Ø
100 mm tubes (check the technical data sheet of the selected model). As can be seen in the table
below, a double-wall Ø 100 mm tube may be necessary in some cases and models.
TYPE OF SYSTEM WITH Ø 80 mm TUBE
WITH DOUBLE-WALL Ø
100 mm TUBE
Minimum length 1.5 m 2m
Maximum length (with 3 90° curves) 4.5 m 8m
For installations situated over 1200 m above
sea level
- mandatory
Maximum number of curves 3 4
Horizontal sections with min. 5% incline 2m 2m
NOTE: load losses of a 90° curve can be equated with those of 1 metre of tube; the serviceable T-
connection is to be considered as a 90° curve.
Fig.9 Fig. 10
17


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Eva Calor Tosca 15 kW at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Eva Calor Tosca 15 kW in the language / languages: English as an attachment in your email.

The manual is 5,06 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Eva Calor Tosca 15 kW

Eva Calor Tosca 15 kW User Manual - German - 38 pages

Eva Calor Tosca 15 kW User Manual - Dutch - 90 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info