643342

Eva Calor SPV-M13 Manual

20
Zoom out
Zoom in
Previous page
1/44
Next page
10.1.2 Panel description
BUTTON 1 (P1) - Temperature increase:
When in programming mode, use this button to modify/increase the selected menu value.When in working
mode/switched off,use instead this button to increase the room thermostat temperaturevalue.
BUTTON 2 (P2)- Temperature decrease:
When in programming mode,use this button to modify/decrease the selected menu value.When in working
mode/switched off,use instead this button to decrease the room thermostat temperaturevalue.
BUTTON 3 (P3) - Set/menu:
Use this button to access temperature setting and user and technician parameter menu. After entering
the menu, use this button to access the next sub-menu or set the value and move to the next menu item
when in programming mode.
BUTTON 4 (P4)- ON/OFF Unlocking:
Hold this button down for two seconds to manually switch the stove on or off respectively depending on its
initial status (switched on or off).
Should have any alarm blocked the stove, press this button to unlock it and subsequently switch it off. After entering the
menu or during the programming phase, use this button to access the upper menu level. Any change is automatically
saved
BUTTON 5 (P5)- Heat output decrease:
When in working mode, use this button to decrease the heat output value.
In menu mode, use this button to move to the next menu item or, in programming mode, to go back to the
subsequent sub-menu item. Any change is automatically saved.
BUTTON 6 (P6)- Heat output increase:
When in working mode, use this button to modify the exchanger speed. In menu mode, use this button to
go back to the previous menu item or, in programmino mode, to go back to the previous sub-menu item.
Any change is automatically saved.
10.2.Menu
Press P3 (MENU) button to access the menu.
It includes several items and levels to access settings and control board programming.
The menu items providing access to the technical setting are protected by access code.
10.2.1 User Menu
The table below briefly describes the menu structure, focussing in particular on the functions available to users.
The menu item 01-fan adjustment is available only if the corresponding function was enabled.
… 20 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Eva Calor SPV-M13 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Eva Calor SPV-M13 in the language / languages: English as an attachment in your email.

The manual is 2,15 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Eva Calor SPV-M13

Eva Calor SPV-M13 Usermanual and installation guide - Dutch - 90 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info