643342
16
Zoom out
Zoom in
Previous page
1/44
Next page
PROGRAMME 1SWITCHING ON/OFF (morning)
UT05 –UT06
Set the PROGRAMME 1 stove switching on and off times by modifying these two parameters. Their value
can be set if UT01 parameter is set to the daily or weekly mode.
UT07
Set the days when PROGRAMME 1 (ON) is active and the days when IT IS NOT (OFF) by modifying UT07. This
parameter is active when UT01 is set to the weekly mode.
Press P2 button to select the day of the week and then enable (ON)/disable (OFF) stove switching on/off
according to PROGRAMME 1 by means of P1 button.
In the example below, the stove switches on only on Saturdays and Sundays according to PROGRAMME 1 (morning).
Day 1
Monday
Day 2
Tuesday
Day 3
Wednesday
Day 4
Thursday
Day 5
Friday
Day 6
Saturday
Day 7
Sunday
Off 1
Off 2
Off 3
Off 4
Off 5
On 6
On 7
PROGRAMME 2 SWITCHING ON/OFF (afternoon)
UT08 - UT9
Set the PROGRAMME 2 stove switching on and off times by modifying these two parameters. Their value
can be set if UT01 parameter is set to the daily or weekly mode.
UT010
Set the days when PROGRAMME 2 (ON) is active and the days when IT IS NOT (OFF) by modifying UT10. This
parameter is active when UT01 is set to the weekly mode.
Press P2 button to select the day of the week and then enable (ON)/disable (OFF) stove switching
on/off according to PROGRAMME 2 by means of P1 button
In the example below, the stove switches on in the afternoon only on working days.
Day 1
Monday
Day 2
Tuesday
Day 3
Wednesday
Day 4
Thursday
Day 5
Friday
Day 6
Saturday
Day 7
Sunday
On 1
On 2
On 3
On 4
On 5
Off 6
Off 7
Example
: TIMER PROGRAMMING
UT01
--- CURRENT DAY SETTING (DAY 7 = SUNDAY)
PROGRAMME1
UT05
---
1
st
SWITCHING ON ( e.g. 07:00am)
UT06 --- 1
st
SWITCHING OFF TIME
( e.g. 09:00am)
UT07 --- DAY CONFIRMATION
( e.g. Day 1 -off / Day2-off/Day3-off/Day4-off/Day5-off/Day6-on/Day7-on )
PROGRAMME 2
UT08 --- 2
nd
SWITCHING ON
( e.g. 06:00pm)
UT09 --- 2
nd
SWITCHING OFF TIME
( e.g. 12:00am)
UT10 --- DAY CONFIRMATION
( e.g. Day 1-on / Day2-on/Day3-on/Day4-on/Day5-on/Day6-off/Day7-off)
9.5.Alarms
The board is fitted with a control system that shows on the display where the failure occurred to inform the user in
case of malfunctioning. Press P4 button to CLEAR the message on the display.
Alarm
Display shows
Fume temperature sensor
ALARM SOND FUMI
Fume overheating
ALARM HOT TEMP
Ignition failure
ALARM NO FIRE
Power outage
ALARM NO RETE
General safety thermostat
ALARM SIC
Clogged chimney
ALARM DEP
The meaning of these alarm messages is explained in detail below.
16


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Eva Calor SPV-M13 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Eva Calor SPV-M13 in the language / languages: English as an attachment in your email.

The manual is 2,15 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Eva Calor SPV-M13

Eva Calor SPV-M13 Usermanual and installation guide - Dutch - 90 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info