751931

Eva Calor Punto Manual

37
Zoom out
Zoom in
Previous page
1/44
Next page
11.3.8 Timer ON 2 switching on 2 hours minutes
Press button 2and then button 8repeatedly to select UT08.
Press then statuses 1and 2
to set timer hours and minutes. Upon finishing, press button 8repeatedly to exit the technical menu or wait
20 seconds.
11.3.9 Timer OFF 2 switching off 2 hours minutes
Press button 2and then button 8repeatedly to select UT09. Press then statuses 1and 2
to set timer hours and minutes. Upon finishing, press button 8repeatedly to exit the technical menu or wait
20 seconds.
11.3.10 Enabling Timer 2
Press button 2and then button 8repeatedly to select UT10. Press then statuses 1and 2
to enable (On) or disable (Off) the timer. LED 3switches on upon completing timer enabling.
Upon finishing, press button 8repeatedly to exit the technical menu or wait 20 seconds.
11.3.11 Parameter percentage adjustment
The pellet load and fume exhaustion percentages can be modified using parameter Cpel and Casp respectively:
•CASP is the fume exhaustion percentage variation.
•CPEL is the pellet load percentage variation. Modify the parameters as follows:
•Enter the UT04 technical menu.
•Press buttons 1 and 2 repeatedly until the display shows “c9”. Hold the buttons down to move more
rapidly.
•Press button 8 to confirm.
•Press button 8 to select Cpel or Casp.
•Press buttons 1 and 2 to modify the value.
•Cpel and Casp values range from -5 to +5. Each step corresponds to a variation equal to ± 5 %.
with respect to the basic value. (PR06 ÷ PR10 for pellet loading and PR18 ÷ PR22 for fume exhaust blower).
•The default values are:
Cpel = 0 Casp = 0
11.4.Alarms
11.4.1 “NO ACC” alarm.
The alarm is triggered when the fume temperature does not increase by a gradient equal to 3
°
C/min
during the LOAD
WOOD or FIRE ON phases and does not reach the temperature set by PR13 within the time set by PR01:
•The switching-on phase is interrupted and the stove switches off.
•The display shows the message “ALAR/ No/
A
cc
”.
•Use the control panel or remote control to clear the alarm (hold on/off button down for at least 2 seconds).
11.4.2 “NO FIRE” alarm.
If the stove switches off during the working mode (the fume temperature reaches a value below the PR13 parameter), the
stove enters the switching-off phase.
•The display shows the message “ALAR/No/Fire”.
•Use the control panel or remote control to clear the alarm (hold on/off button down for at least 2 seconds).
… 37 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Eva Calor Punto at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Eva Calor Punto in the language / languages: English as an attachment in your email.

The manual is 2,15 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Eva Calor Punto

Eva Calor Punto User Manual - German - 46 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info