668834
18
Zoom out
Zoom in
Previous page
1/55
Next page
4.5.3 Holes for exhaust tube passage on walls or roof: recommended
insulation and diameter
Once the location of the stove has been decided (section 4.1), you will have to drill the hole for
passage of the fume exhaust tube. This varies depending on the type of installation (therefore
on the exhaust tube diameter, see 4.5.2) and on the type of wall or roof to be crossed (table 3).
The insulator must be of mineral origin (rock wool, ceramic fibre) with a nominal density greater than
80 kg/m3.
Insulation
thickness
[mm]
Fume exhaust tube diameter [mm]
Ø80
Up to 24 kW
Ø 100
From 28 kW
Diameter of holes to be created [mm]
Wooden wall, or wall which
is flammable or has
flammable parts
100 280 300
Concrete wall or roof
50 180 200
Brick wall or roof
30 140 160
4.5.4 Using a traditional type chimney flue
If you wish to use an already existing chimney flue, it is advisable to have it checked by a professional
chimney sweep to ensure that it is watertight. This is because fumes, being slightly pressurised,
could infiltrate cracks in the chimney flue and invade living spaces. If an inspection finds that the
chimney flue is not perfectly intact, it is advisable to intubate it with new material. If the existing
chimney is large, we recommend inserting a tube with a maximum diameter of 150 mm. It is also
advisable to insulate the fume exhaust duct. Figs. 11 and 12 demonstrate the solutions to adopt if
you want to use an existing chimney flue.
Fig. 11
Fig. 12
18


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Eva Calor Hydro Slim 16 kW at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Eva Calor Hydro Slim 16 kW in the language / languages: English as an attachment in your email.

The manual is 5,06 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info