668826
8
Zoom out
Zoom in
Previous page
1/47
Next page
7
01. PRODUCT SAFETY
Do not use the appliance as waste incinerator or for any other purpose other than the intended one.
Do not use liquid fuels.
Do not modify the appliance without prior authorisation.
Use only original spare parts recommended by the manufacturer.
Make sure that the stove is transported in compliance with safety regulations. Avoid any improper transfers or knocks
that may damage the ceramics or the structure.
The metal structure is coated using high temperature paints. When using the appliance for the first few times,
unpleasant odours may be given off due to the paint of the metal parts that is drying: this is in no way dang erous and
in such case, simply ventilate the premises. After the first heating cycles, the paint will reach its maximum adhesion and
all its chemical and physical features.
The reload the hopper, simply open the access lid and pour in the pellets, also dur ing normal operation, making sure
that no pellets fall out of it. Always refuel the hopper before leaving the operating stove unattended for long periods of
time.
Whenever the hopper and the Auger tube get completely empty, the appliance will be automatically switched off. It
may take two separate ignitions to resume operation at ideal working conditions since the Auger tube is very long.
ATTENTION! If the stove is not properly installed, power outages may result in fume spillages. Under specific
circumstances, an uninterrupted power supply unit must be installed.
ATTENTION! Being a heating appliance, some parts of the stove can become extremely hot. We therefore recommend
paying special attention during operation.
WHEN THE STOVE IS WORKING:
o do not open the door;
o do not touch the door glass since it becomes extremely hot;
o keep children away from it;
o do not touch the fume outlet;
o do not pour any liquid inside the firebox;
o do not perform any maintenance operations if the stove is not cold;
o only qualified technicians are allowed to perform any operation;
o follow all the instructions contained herein.
Anti-explosion
Some products are fitted with a safety device to prevent explosion. Before switching on the product or, in any case, after an y
cleaning operation, make sure that the device is correctly positioned in its seat. The device is located on the firebox door upper
edge.
8


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Eva Calor Hydro 20 kW at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Eva Calor Hydro 20 kW in the language / languages: English as an attachment in your email.

The manual is 4,1 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Eva Calor Hydro 20 kW

Eva Calor Hydro 20 kW User Manual - German - 38 pages

Eva Calor Hydro 20 kW User Manual - Dutch - 90 pages

Eva Calor Hydro 20 kW User Manual - French - 43 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info