751932
13
Zoom out
Zoom in
Previous page
1/44
Next page
9.2.LED indicators
Active Chrono LED (L1):
The LED is on when the UT1 user parameter has a value different from OFF and the weekly or daily programming
can be set.
Auger tube ON LED (L2):
The LED is on whenever the Auger tube is enabled and the motor, feeding the pellets in the combustion chamber, is
working, i.e. during START-UP and WORK mode.
Remote control receiverLED(L3):
The LED flashes whenever the control panel receives a signal from the IR remote control to modify temperature/heat
output.
Room thermostat LED (L4):
The LED is on whenever the room temperature is higher than the set temperature (external thermostat not in use). If
an external thermostat is available, the LED is on whenever the fume temperature exceeds 250°C.
Temperature setting LED (L5):
The LED flashes when working in the user/technician menu or while setting the temperature.
9.3.TheDisplays
Status/Heat Output/Paramenter label Display (D1):
It shows the board status during start-up phase.
During working mode, it shows the heat output set by the user.
When modifying user/technician parameters, it shows the label of the parameter in question.
Status/Time/Temperature/Parameter value Display (D2):
It shows the board status during start-up phase.
During working mode, it shows the temperature set by the user.
When modifying user/technician parameters, it shows the value of the parameter in question.
13


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Eva Calor Fuoco at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Eva Calor Fuoco in the language / languages: English as an attachment in your email.

The manual is 2,15 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Eva Calor Fuoco

Eva Calor Fuoco User Manual - German - 46 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info